ALARD EQUIPMENT CORP.
A list of some recently acquired items of equipment - items
purchased, received into stock, and/or listed as available for sale
nationally. CALL us for details!
ALARD EQUIPMENT CORP
Tuesday, April 20, 2010
JUST OUT OF OUR SHOP AT ALARD!
VANMARK STAINLESS STEEL IMMERSION WASHER / RINSER / DIP TANK. 10' long by 46" wide by 32" deep wet tank, with 36" wide by 14' long elevating discharge conveyor. There is a 4" DESTONER GAP between the tank and the belt at the infeed end where rocks and sinkers would drop into the bottom of the tank for later cleanout, but the conveyor is otherwise trimmed in UHMW such that product cannot get around or behind the conveyor. The conveyor has a plastic interlocking chain type belt with rectangular perforations 1/2" long by 3/16" wide, and has 1" cleats on 4" centers, and runs between 6" high stainless steel sides. The conveyor sits at a maximum water depth of about 23", and the conveyor body is on a hinge so it can be tipped up for cleaning. 33" infeed height into the tank, 68" discharge height from the discharge belt, or 36" discharge height from a removable (bolted-on) dual split discharge with 8.5" diameter outlets on 18" centers. The conveyor extends 5'9" past the end of the tank for an overall length of 15'10". The conveyor has an SEW Eurodrive 3 phase mechanical variable speed drive.
Beneath the conveyor at the discharge end is a 20" long by 64" Wide by 32" deep overflow / recirculation tank which is plumbed via a center bottom outlet to a bronze filter, then on to a stainless steel CENTRIFUGAL PUMP with a .5HP 208/230/460 volt 3 phase motor, which returns / recirculates the water into the the ank
via (7) water jets horizontally arrayed along the upper lip of the infeed end of the tank. The recirculation tank is wider than the rest of the washer, with a hinged stainless steel cover over the part that sticks out of the left side, which would facilitate access for making up solution.
All food grade sanitary stainless steel construction (but for the motors). Overall dimensions: 16'L by 66" wide by 88" high on the floor (not counting anyskiddi
ng or crating).
In stock in EXCELLENT operational, mechanical, and cosmetic condition, ready to
go and available for immediate shipment.
Ref. #: Y0482
Friday, April 16, 2010
JUST OUT OF THE SHOP AT ALARD!
VANMARK STAINLESS STEEL ROLLER INSPECTION CONVEYOR / ROLLER INSPECTION TABLE; 24" wide by 9' long with 2.25" diameter PVC rollers with a 1/4" gap between. Roller conveyor runds between 3" high stanless steel sides at a 38" working height on stainless steel legs. All sanitary food grade stainless steel construction including removable stainless steel side shrouds which give full acess for cleaning. Complete with an SEW Eurodrive variable speed drive. In stock in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment. (Y0510)