 RECENT ACQUISITIONS, ALARD EQUIPMENT CORP. |
|
A list of some recently acquired items of equipment - items
purchased, received into stock, and/or listed as available for sale
nationally. CALL us for details! ALARD EQUIPMENT CORP Contact us! 
JOIN our no-more-than-monthly Email list! 
 
Archives |
Friday, January 29, 2010
ALARD'S RECENT ACQUISITIONS BLOG HAS MOVED Due to changes by our former blogging service*, as of May 26th, 2010, our NEW "RECENT ACQUISITIONS LIST" will henceforth be posted at http://www.alard-equipment.com/mt/recent/ Please make note of the change!
RECENTLY
RECEIVED at ALARD!
 All stainless steel product contacts, painted steel base. Complete with Alfa Laval control module with stainless steel control panel with Allen Bradley PLC controller, 230 / 460 volt 3 phase electrical input. Includes tooling, and manual. A current model for which parts and service are available from the manufacturer. Previously used in a brewery. In stock in good condition, available for immediate shipment.(Y0435) WEIGHPACK
AUTOMATIC BAG-FILLER-SEALER SYSTEM, consisting of a WEIGHPACK model
AEF-7 LINEAR SCALE with
a ZIPPY BAGGER...
 ...for automatic bag indexing, netweigh bag
filling and bag sealing, with premade, wicketed bags.
The AEF-7 single lane bulk and dribble
linear scale netweigh filler is manufacturer rated for fills
from 1/2 ounce to 10 lbs, with rigidized / dimpled (non stick)
stainless steel surfaces.
 The Weighpack Zippy Bagger
automatically indexes premade wicketed bags, opening and holding them
to accept fills from the scale, then sealing the bag, and is
manufacturer rated for up to 30 cycles per minute on bags from 6" to
16" wide, 8" to 20" high, of 3 mil or thicker material. Both the filler and the bag indexer / sealer are constructed for food grade sanitary packing applications, with stainless steel product contacts and stainless steel shrouding. In stock in very good condition, available for timely shipment. Ref. #:Y0385  BROWN
Model 3900 STAINLESS STEEL JUICE EXTRACTOR / FINISHER / SCREW PRESS / SEPARATOR, manufacturer rated for up a nominal 50 gallons per minute. A 6" diameter by 30 inch long constant auger with a constant flight depth of 1.25" with close tolerances to a 360 degree screen cage with 1/8" diameter perforated screen. A pneumatically operated pressure-plate discharge controls operating pressure and solids dryness.
All sanitary food grade stainless steel
constuction, with hinged clean-in-place cages that open without tools
for fast and easy cleaning. 7.5 HP 230/460 volt 3 phase 60 Hz belt
drive motor.
In stock in EXCELLENT operational,
mechanical, and cosmetic condition, available for immediate
shipment.
(Y0451) CMI SLIT / TIP-BUTT / BLOW TYPE ONION PEELER. Consists of:
This stainless steel, gentle onion peeler
was designed to produce whole peeled onions for direct sale or as a
prerequisite to onion ring production, is powered by 3-phase
drives.
IN stock in EXCELLENT condition, available for timely shipment. (Y0454) Thursday, January 28, 2010
IN STOCK AT ALARD!
 GROEN
GAS-FIRED STAINLESS STEEL 40 GALLON BRAISING PAN MODEL NHFP-40.24" front-to-back, by 41" wide by 9" deep braising vessel. Complete with electric-powered tilt-to-dump and front pouring lip. Jetted for natural gas, but can easily be re-jetted for propane if necessary. 110 volt single phase (standard household current) control circuit. All food grade stainless steel product contact surfaces and exterior shrouding protecting the heating coils. This braising pan / skillet is IN STOCK in EXCELLENT
mechanical, operational and cosmetic condition, having been refurbished
with all new controls, a new tilt mechanism, and new top cover; --ready
to go and available for immediate shipment.
Ref. #:Y0410
 STAINLESS STEEL VIBRATING DEWATERING
SHAKER / VIBRATORY GRADER, with 29" wide by 46" long bolt-in
replacable screen between 4.5" high sides. Underside water collection
pan with 10" center bottom outlet. Tubular stainless steel stand
provides a 58" infeed height, and 53" discharge height as configured.
All stainless steel construction.
Complete with a 1HP 3 phase eccentric shaker drive. Needs screen, otherwise in stock in very good operational, mechanical, and cosmetic condition, available for timely shipment. (Y0417) |
