Supplying
used food processing machinery since 1952, with over six
warehouses
of used food processing equipment IN STOCK!
ALARD
EQUIPMENT CORP.
6483 Lake Avenue
Williamson, NY 14589-0057 U.S.A.
315-589-4511 (voice)
315-589-3871 (fax)
6-inch
HYDRO TRANSPORT FOOD PUMP
with
STAINLESS STEEL VORTEX TANK and MOTOR-DRIVE...
Click on picture(s) to
enlarge!
Click on picture(s) to
enlarge!
Also available in stock as Food Pump ONLY;
--CALL 315-589-4511 to discuss your custom configuration need...
Food grade pump-in-water conveyor /
flume kit including Cornell 6-inch food pump, feed tank, and drive on
common stainless steel frame. Pump
whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply
preservative solutions while conveying horizontally and/or
vertically for long or short distances. Ideal for food processing
applications such as fruit and vegetable washing, fresh-cut / pre-cut
produce hydro-cooling and chilling applications, and/or pre-heating
prior to cutting, peeling, etc; including shredded lettuce and
cabbage, cut romaine, whole or cut potatoes, french fries, potato
chips, live fish (!), cranberries, carrots, apples, cherries, peas,
broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers,
olives, cucumbers, raisins, beans, corn, peaches, beets, oranges, and
more.
FEATURES:
Cornell 6NHPP-F16K
cast-iron hydro
flow food pump with stainless steel impeller, six-inch inlet and
outlet. Stainless steel body pump also available; --call 315-589-4511
do discuss your specific requirements.
Manufacturer rated for solids
handling ability for product sized up to 4 inch diameter by 6 inches in
length. Larger diameter pumps are available for larger product
sizes;
--call 315-589-4511 do discuss your specific application
requirements.
Expanded volute PP series pump for
the ultimate in gentle handling of
delicate food products. So gentle
the manufacturer rates for pumping live fish!
Specifically designed and built for
industrial food processing application use, with tons-per-hour
throughput capacity.
Manufacturer recommends 2 or 3 to 1
ratio of water to product, with your product capacity determined by
horsepower, RPM, and total dynamic head resistance. Pump curves are
available by request; --call 315-589-4511 do discuss your specific
application requirements.
Stainless steel in-feed tank 41
inches long by 33 inches wide by 19 inches deep; with a 35 inch
product infeed height, and a 18.5 inch height to center of return
flange.
The tank has a 2 inch inner diameter
NPT threaded (female) cleanout drain near the return flange end, at a
14.5 inch discharge height.
The pump, tank and drive, are
mounted together on a tubular stainless steel frame.
7.5HP 1,765 RPM 208/230/460 volt 3
phase drive. Other RPM and/or horsepower drives, optional variable
speed controls, and / or drive-ratio setups are available:--call
315-589-4511 to tell us what YOU need to pump food products in water.
NEW, with
two-year manufacturer
warranty.
Almost
always in stock available for
immediate shipment; CALL 315-589-4511 to confirm availability, and to
discuss your particular hydro food pump application requirements.
Unless otherwise stated, volume, speed,
and/or
capacity estimates given are those of the manufacturer(s) of the
equipment.
All offers are subject to prior sales and owner's confirmations. Unless
otherwise specified, any prices shown do not include skidding, crating,
or freight.
We won't share your Email
address or other
information with anyone, and we won't abuse your trust by sending
constant nagging messages.Our Email updates are no-more-than-monthly.