6-ROLL PEELER, WASHER, SCRUBBER
for fruits and vegetables,
 stainless steel, continuous,
in-stock NEW...

An Alard Model PWS6, six-roll continuous peeler-washer which can be fitted with any combination of brushes and / or abrasive rolls for peeling, brush washing, scrubbing, or finishing of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and others.

OPERATION:

Raw product is continuously fed to the peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action are provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by the adjustable-opening discharge gate, and the inclination of the machine.

FEATURES:

• 27 inch long by 15 inch wide hopper tapers to a 15 inch by 15 inch in-feed opening in the hinged stainless steel cover.
  
  
• Cover configured to be kept bolted shut for safety.
  
  
• Lubricating and rinsing action are provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
  
  
• Peeled product discharges through a stainless steel discharge gate with a gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure. Maximum discharge opening with the gate open as far as it goes, is a "half moon" shape 15 inches wide by 6 inches high.
  
  
• Water, peels and debris drop to a full length stainless steel water catch pan with a 7 inch long by 6 inch wide center bottom water and peel discharge outlet.
  
  
• Capacities vary widely depending on product characteristics, process (peeling, washing, scrubbing), and finish, but 3 tons per hour is a ballpark capacity for a six-roll peeling machine.
  
  
• Unless otherwise specified, stock machines come with six (6) abrasive rolls, each 6 feet long by 6 inches in diameter; but can be set with any combination of abrasive and / or brush rolls to buyer need / specification for stronger or gentler peeling / scrubbing action. 
  
  
  • Brushes come in many materials and grades (e.g. for stiffness), and are available at an added cost relative to abrasive rolls. We generally stock stiff polyester brush rolls, but special orders for buyers with particular grit and/or brush specifications can be expected to require some lead time for acquisition. Call 315-589-4511 to discuss your food process fruit and vegetable peeling, washing, scrubbing application(s).
    
    
• The abrasive and / or brush rolls are mounted parallel (in-line) with product flow.
  
  
• Complete with central lubrication cluster for ease of maintenance.
  
  
• Chain / sprocket drive powered by a 5 HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
  
  
• We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box.
  
  
• Made in the USA. 

As of this writing this six-roll continuous abrasive peeler (or brush washer) is in stock new, available for immediate shipment. 

CALL 315-589-4511 to confirm availability and discuss your particular fruit and/or vegetable peeling and washing equipment needs.

ALARD item reference #: Y5866

Urschel
Model RA DICER / Model RA-A DICER...

A 3-dimensional fine dicing machine for a wide range of dice and strip cuts from a variety of products such as relish, salsa, fruits, vegetables, nuts, cheeses and processed meats. Stainless steel plated cutting parts, USDA sanitary compliant.

FEATURES:

• This machine was built and the manufacturer tag is stamped as a model "RA", but it's cutting parts and castings have been replated and updated to all stainless steel, USDA sanitary compliant; equivalent to the RA-A model. 
  
  
• Equipped with 1/8 inch feed drum.
  
  
• Includes a juice chute for catching juice such as when dicing tomatoes.
  
  
• Maximum product input size 3.5 inches (88.9mm) in any dimension.
  
  
• Three cutting dimensions:
  
  
  • Slice thickness: 1/16 to 3/8 inch 1.6 to 9.5 mm - knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch / 3.2 to 25.4 mm - knives & spacers.
    
    
  • Crosscut knife cuts: .05 to 3 inch / 1.3 to 76.2 mm - change part.
    
    
  • CALL 315-589-4511 to discuss your particular cutting specification!
    
    
• All food grade USDA sanitary stainless steel construction.
  
  
• Stainless steel control panel with safety interlock system.
  
  
• 5 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel Laboratories RA-A dicer is in stock at ALARD in EXCELLENT operational, mechanical, electrical & cosmetic condition needing only change parts installed prior to shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machine needs.

ALARD item reference #: Y5962

URSCHEL Model RA-A DICER,
with bypass chute,
in stock, refurbished...

An Urschel RA-A dicing machine with bypass chute. A three-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as pickle relish, salsa, fruits, vegetables, cheese, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies. Also includes slice-bypass chute for additional versatility for cutting two-dimensional cuts for dicing or granulation of nuts, spices, clams, raisins, dried prunes, citrus peel. 

FEATURES:

• Equipped with a secondary / by-pass in-feed chute, which bypasses the slice shell for granulation, strip cutting, or two-dimensional cutting applications such as for chopping herbs, green onions, nuts (e.g. almonds, cashews, walnuts & peanuts) and other fruit and vegetable products.
  
  
• Includes a juice chute for catching juice such as when dicing tomatoes. 
  
  
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
  
• Three cutting dimensions (or two-dimensional cuts using aforementioned bypass feed chute).
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 0.05 to 3 inch (1.3 to 76.2mm) -- change part: Call 315-589-4511 to tell us YOUR cutting specification!
    
    
• USDA food grade sanitary stainless steel product contact surfaces; refurbished with castings freshly replated.
  
  

• Stainless steel control panel.
  
  
• Safety interlock system which cuts power to the machine if chutes or guards are removed, with maintenance lock-out.
  
  
• Stop switches on front and back sides of the machine,
  
  
• 5 HP stainless steel shrouded 3 phase drive motor.
  
  
• 208/230 volt electrical input.
  
  

As of this writing, this refurbished Urschel RAA is in stock at ALARD, in EXCELLENT operational,  mechanical, electrical, and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machinery needs.

ALARD item reference #: Y5831

DEMONSTRATION VIDEO
Urschel
Model SL-A MEAT DICER, strip cutter, slicer...

The Urschel SL-A MEAT CUBE CUTTER is manufacturer recommended and designed for continuous operation, uniformly cutting dices, strip cuts or slices of cooked or raw frozen tempered meats, including, but not limited to pepperoni, hard salami, cooked roast beef, ham, pork, mutton, chicken, liver, seafood, fish, pet food, onions, and cabbage.

FEATURES:

• Manufacturer rated for infeed of firm products up to 4 inches (101.6mm) in any dimension.
  
  
• A three-dimensional cutter manufacturer rated for cuts (with appropriate change parts).
  
  
  • Slice knife cuts to 1/2 inch (12.7mm).
    
    
  • Circular knife cuts: 1/8 inch to 2 inches (3.2 to 50.8mm).
    
    
  • Crosscut knife cuts: 1/8 inch to 3 inches (3.2 to 76.2mm).
    
    
  • Many sizes and shapes of cut product can be produced by using some or all of the spindles and adjusting the slice thickness.
    
    
    • Slices can be produced by removing the circular and crosscut knife spindles.
      
      
      • Strip cuts can be made by removing the crosscut knife spindle, whence the length of the strips will depend on the size of the original product.
        
        
      • Note re cutting cubes / dices with all three spindles: This machine makes all three cuts on the cube separately, so the product is not crushed as it would be on certain other types of dicing machinery.
        
        
      • CALL 315-589-4511 to discuss your specific industrial food process cutting application.
        
        
        
• Manufacturer literature rates the throughput capacity of this machine at 2,500 to 5,000 lbs per hour depending on cut size and product being processed.
  
  
• Food grade stainless steel USDA sanitary construction.

As of this writing, this Urschel SL-A meat cube and strip cutting machine is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat processing particle size reduction application.

Alard item reference #: Y4563