A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

March 2025 Archives

CMI PC1 LIQUID CHILLER, falling film plate chiller, Y5925

CMI FALLING FILM CHILLER,
with 54x72 food-liquid chilling plate,
food grade stainless steel...


y5925i_crop_email.jpg

CMI Model PC-1 food grade sanitary stainless steel falling film plate chiller for rapid cooling of juice, water and other potable liquids.

FEATURES:

  • y5925v_crop_email.jpgOne (1) 54 inch by 72 inch stainless steel laminar flow chill plate.

  • Fully enclosed falling film cascade chamber with multiple access doors to eliminate product contamination.

  • Top mounted distribution pan with PVC header.

  • y5925m_crop_email.jpg20 inch wide by 10 foot long by 44 inch deep single walled bottom catch tank with float valve.

    • Overall dimensions fully assembled with chiller over tank, are approximately 10 feet long by 4 feet wide, by 10 foot six inches high.

  • Plates suitable for FREON refrigerants.

  • Easy to clean & inspect with virtually no downtime for maintenance.

  • All food grade sanitary stainless steel construction.


As of this writing, this laminar flow food fluid chiller is in stock at ALARD, in EXCELLENT condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food grade liquid cooling needs.

ALARD item reference #: Y5925

USDA sanitary stainless steel TOTE DUMPER, Alard model BD48A, Y5929

BIN DUMPER / TOTE DUMPER,
USDA food grade sanitary
stainless steel,
for up to 48 inch wide bins,
with onboard hydraulic power;
--IN STOCK NEW...


y5929_crop_email.jpg


Alard Model BD48A USDA sanitary stainless steel forward bulk box dumper
, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, pallet boxes, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.


FEATURES
:

  • y5929c_crop_email.jpgSized for 48 inch wide or smaller totes, with bin-holder measuring 54 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • y5929b_crop_email.jpgFood grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.

  • Heavy duty tubular stainless frame construction.

  • y5929j_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208/230/460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your specific bulk food product container dumping need.

As of this writing this new forward bin dumper is in stock at Alard, complete, fully assembled and ready to go, available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5929

Refurbished NSEP Bock FP-90 SPIN DRYER, Y5755

RECONDITIONED SPIN DRYER,
Bock Model FP-90...

 
y5755a_crop_email.jpg


This refurbished North Star Engineered Products (NSEP) Bock FP-90 Centrifuge is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.

FEATURES:

  • y5755i_crop_email.jpg7.36 cubic foot removable basket measuring 30 inches in diameter by 18 inches deep.

    • 3/8 inch perforated basket.

    • Lifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.

  • Manufacturer rated 130 lb (dry weight) batch capacity for up to 1,950 lbs of product per hour.

  • Lid-opening assist cylinders.

  • y5755n_crop_email.jpgIncludes operator controls with a 10 minute settable timer and safety interlock system. Machine won't start with the lid open, and lid locks during spin cycle.

  • Durable hydraulic transmission.

  • Pneumatic brake.

  • All food grade stainless steel construction including basket, tank & base.

  • 5 HP belt drive motor.

  • 208 / 230 volt 3 phase electrical input.

As of this writing, this like-new BOCK FP90 spinner is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fresh-cut / pre-cut produce packing equipment needs.


ALARD item reference #: Y5755


SCREW CONVEYOR, food grade, stainless steel, 6x12, Y5908

ELEVATING SCREW CONVEYOR,
6x12, stainless steel...


y5908c_crop_email.jpg

A food grade stainless steel incline feed auger conveyor for industrial food process food product handling.


FEATURES
:

  • y5908h_crop_email.jpg6 inch diameter by 12 foot long auger

  • Removable bolt-on stainless steel flat covers.

  • 6 inch diameter pipe infeed over 8 inch by 8 inch flange.

  • 3 inch diameter Tri-clamp drain on infeed end of trough.

  • 6 inch by 6 inch discharge with water spray.

  • Food grade sanitary stainless steel construction.

  • 2 HP chain drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this screw conveyor is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your product handling needs.

ALARD item reference #: Y5908

CVP A300 BAG SEALER, vacuum, gas-flush, 32 inch seal bar, Y5938

CVP
VACUUM, GAS-FLUSH BAG SEALER,
Model A-300, 32 inch seal bar...

y5938a_crop_email.jpg

A refurbished CVP A300 Fresh Vac food grade dual-snorkel jaw type bag sealing machine, manufacturer rated for modified atmosphere packaging (MAP) of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life.


FEATURES
:

  • 32 inch seal bar with two (2) snorkels with hand lever activation.

  • Vacuum and gas-flush capability -- extends shelf life, preserves color of pre-cut produce, asphyxiates insects & larva in organic products.

  • y5938d_crop_email.jpgAdjustable angle stainless steel frame with threaded rod adjustable feet.

  • USDA food grade sanitary stainless steel construction.

  • Pneumatic powered venturi vacuum pump.

  • 110 volt single phase (standard household current) electrical input.

  • y5938i_crop_email.jpgPneumatically powered seal bars and snorkels require compressed air supply.

As of this writing, this CVP Freshvac modified atmosphere packaging (MAP) bag sealer is in stock at ALARD, refurbished to very good operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular pre-cut produce processing and packaging equipment needs.

ALARD item reference #: Y5938

BATCH TUMBLE MIXER, food grade, stainless steel, tilt discharge, Y5917

FOOD TUMBLE MIXER,
14 cubic foot stainless steel
drum type batch mixer,
tilt discharge...


y5917c_crop_email.jpg

A food grade stainless steel tumble mixer, in a "cement mixer" configuration for batch mixing and blending applications, for gentle dividing, folding, and tumbling action, with inline infeed and discharge with power tilt to dump. Well suited for mixing and blending wet or dry particulate products, spices, cut fruit, diced vegetables, salsa, sauces, wet salads (fruit salad, macaroni salad, potato salad) and/or other ingredients and products for industrial food processing production.


FEATURES
:

  • y5917d_crop_email.jpgFood tumbler mixer barrel has a 26 inch diameter infeed / discharge opening.

  • 40 inch diameter by 40 inch deep <>14 cubic foot batch mixer drum with (3) 35 inch long by 6 inch wide lifting paddles.

  • Inline straight-through product flow, feeds on one side, flips over approximately 180 degrees to discharge on the opposite side.

  • Power tilt discharge.

  • Tubular stainless steel tumbler support stand set for a 67 inch high infeed, 38 inch discharge height.

  • y5917r_crop_email.jpgOperator control panel.

  • 1 HP drum drive, 1.5 HP tilt drive.

  • All food grade stainless steel construction.

  • 208/230 volt 3 phase electrical input.

As of this writing, this batch tumble mixer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5917

Axon HEAT SHRINK TUNNEL, for tamper-evident bands, neck sleeves, Y5912

AXON EZ-48BR
HEAT SHRINK TUNNEL,
all stainless steel...

 
y5912c_crop_email.jpg


The Axon Model EZ48BR is a heat shrink tunnel designed for tamper evident band applications to provide optimum shrink performance in a minimum space.


FEATURES
:

  • y5912d_crop_email.jpg24 inch long by 7.5 inch wide heat tunnel opening.

  • Left to Right product flow.

  • Mounts over an existing line.

  • Digital temperature control.

  • All food grade stainless steel construction.

  • Manual crank height adjustable pedestal stand.

  • y5912e_crop_email.jpg220 volt single phase electrical input.

  • Works with band sealers and neck sleeve applicators (NOT included), such as Axon's EZ-SEAL line of TAMPER EVIDENT BANDERS, which we have in stock at Alard as of this writing: CALL 315-589-4511 to confirm availability, and to discuss your particular food product tamper-proofing application needs.

As of this writing, this heat shrink tunnel is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food packaging needs.

ALARD item reference #: Y5912

12-inch DISINTEGRATOR, Corenco M15DA angled mill, Y5904

CORENCO ANGLE DISINTEGRATOR
Model M12A, 20 HP,
food grade stainless steel
hammer-mill, grinder...


y5904k_crop_email.jpg

A 12-inch Corenco Model M15DA angled mill DISINTEGRATOR, manufacturer recommended for grinding, shredding, delumping, homogenizing, fine dispersing or fine pulping of wet & dry products. For particle size reduction in food grade high-capacity industrial production environments, such as grinding, pureeing, granulating, pulverizing, and wet grinding, in fruit & vegetable processing, nutraceutical, chemical and pharmaceutical applications.

FEATURES:

  • y5904g_crop_email.jpg21 inch diameter by 10 inch deep infeed cone.

  • 12 inch rotor diameter.

  • Four (4) tip impeller - (1) sharp and (3) blunt.

  • 3/16 inch perforated screen.

  • 16 inch by 5 inch rectangular discharge.

  • 42 inch infeed height, 8 inch high discharge.

  • Sanitary stainless steel food contacts.

  • y5904f_crop_email.jpg20 HP direct drive motor.

  • 230 volt 3 phase electrical input.


As of this writing, this food grade stainless steel Corenco disintegrator mill is in stock at ALARD, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process particle size reduction needs.

ALARD item reference #: Y5904

Urschel RA-D DICER, cheese cutter, Y5838

URSCHEL MODEL RA-D DICER,
3A dairy sanitary,
cheese dicing machine...


y5838y_crop_email.jpg

This Urschel Model RA-D CHEESE DICER is mechanically the same as the Model RA or RA-A dicer with minor variations to be manufacturer rated for USDA sanitary dairy product processing applications. As with the RA and RA-A models, this is a 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as cheeses, pickle relish, salsa, fruits, vegetables, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies.

 FEATURES:

  • Three cutting dimensions:

    • y5838zf_crop_email.jpgSlice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.

    • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.

    • Crosscut knife cuts: 1/16 to 3 inch (1.6 to 76.2mm) - change part.

  • Maximum product input size of 3.5 inches (88.9mm) in any direction.

  • Three (3) paddle impeller.

  • 58 inch infeed height, 22 inch discharge height.

  • USDA dairy sanitary stainless steel construction.

  • y5838zb_crop_email.jpgStainless steel factory control box and safety INTERLOCK system.

  • 5 HP stainless steel shrouded drive motor.

  • 460 volt 3 phase electrical input.


As of this writing, this item is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment - needing only to be set up with change parts prior to shipping.

CALL 315-589-4511 to confirm availability and discuss your particular high-capacity food process cutting equipment needs.

ALARD item reference #: Y5838

6-inch FOOD PUMP with feed tank and drive, Y5963

6 inch
HYDRO TRANSPORT FOOD PUMP
with STAINLESS STEEL FEED TANK
and MOTOR DRIVE.


y5963f_crop_email.jpg

Food grade pump-in-water conveyor / flume kit including a NEW Cornell 6-inch food pump, integrated with a pre-owned / like-new Commercial feed tank, with new motor-drive.

Pump whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply preservative solutions while conveying horizontally and/or vertically for long or short distances. Ideal for food processing applications such as fruit and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and chilling applications, and/or pre-heating prior to cutting, peeling, etc; including shredded lettuce and cabbage, cut romaine, whole or cut potatoes, French fries, potato chips, live fish (!), cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn, peaches, beets, oranges and more.

FEATURING:

  • A new Cornell  6NHPP-F16K cast-iron hydro flow food pump with stainless steel impeller, six-inch inlet and outlet. Stainless steel body pumps are also available in stock (as of this writing).

  • Manufacturer rated for solids handling ability for products up to 4 inch diameter by 6 inches in length. Larger diameter pumps are available for larger product sizes -- CALL 315-589-4511 do discuss your specific application requirements.

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products -- so gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM and total dynamic head resistance. Pump curves available by request.

  • y5963g_crop_email.jpgPre-owned / like-new Commercial Mfg. stainless steel feed tank 42 inch long by 30 inch wide by 20 inch deep stainless steel tapered bottom.

  • Tank has a 2 inch threaded bottom drain and flexible coupling to the pump.

  • y5963d_crop_email.jpg5HP belt drive with pulley-type variable speed
    control.

  • 208 / 230 / 460 volt 3 phase electrical input.

The Cornell hydro transport food pump is frequently employed to power open water flume systems, while others pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent or a preservative solution such as Vitamin C.

The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix or pack the final product.

Others use the chill flume after a blancher, for pre-cooling blanced food products in water prior to running them through an IQF freezer tunnel. Others use the cooling flume system just to convey product in water.

In every case, the powerful Cornell Food Pump can gently move high tons-per-hour output to wherever it needs to go in your food processing plant.

ALARD also stocks and handles various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and/or recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application.

With Cornell's large range of hydro-transport pump size and material configurations, and with ALARD's ability to configure and "gear" the pump to the buyer's specific needs, ALARD's Cornell Hydro-Transport based flume kits are a superb tool for a wide variety of industrial food processing applications.

As of this writing, this hydro food transfer pump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and/or pumping equipment needs.

ALARD item reference #: Y5963

Food grade BAG PACKING TABLE, stainless steel, 2-station, Y5887

BAG PACKING TABLE,
2-station, food grade, stainless steel,
for fill by weight,
with scales & bag holders...


y5887b_crop_email.jpg


An Alard Model BT2020 2-spout food grade stainless steel bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products.

FEATURES:

  • This food grade stainless steel two-person BAGGING TABLE measures 43 inches long by 75 inches wide with sides that taper from 13.75 inches high at the back down to 5.75 inches in the front.

  • y5887_crop_email.jpgThis bag filling manual pack table features an ANGLED BACK in order to feed product closer to the operator's reach. The flat-bottom portion of the table is only 29.5 inches in depth (from front to back), while the angled back-stop allows for additional full-load capacity.

  • Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.

  • Each bag-filling station has a standard 6.5 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for larger or smaller bag sizes.

  • Each filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.

  • Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjustable to accommodate different bag lengths.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase (household current) electrical input.

  • Compressed air required for the pneumatic bag holders.

  • NEW.

OPERATION:

  • y5887e_crop_email.jpgEach operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.

  • The operator then pulls product from the table into the filling tube until the proper weight is made.

  • Overages can easily be removed.

  • The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.

As of this writing, this bag packing table is new in stock at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5887

Floor-level in-feed BIN DUMPER, food grade, stainless steel, in stock, Y5890

BIN DUMPER / TOTE DUMPER,
USDA sanitary food grade,
stainless steel,

for 40 by 48 inch bins,
hydraulic powered;

--IN STOCK NEW...

y5890e_crop_email.jpg

ALARD Model BD40A USDA sanitary stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURES:

  • Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel dumper construction, with all USDA sanitary welds on all product contact surfaces (i.e. inside the bin holder); with continuously welded smooth seams all around the interior.

  • Heavy duty tubular stainless steel base frame construction.

  • y5890b_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208/230/460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.

As of this writing, this food grade stainless steel floor-level infeed BIN DUMPER IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5890

Waukesha PUMP, twin lobe, model 134, Y5770

Waukesha Model 134
SANITARY ROTARY LOBE PUMP,
rectangular in-feed
for hopper or pipe-feed,
positive displacement...

 y5770c_crop_email.jpg

A Waukesha sanitary PD twin lobe pump, with rectangular flange inlet, is manufacturer recommended for pumping highly viscous and/or sticky substrate such as meat, pet food, dough, fondant, cheese plus other similar difficult to handle products in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications.

FEATURES:

  • Versatile feed and orientation options:

    • y5770b_crop_email.jpg3 inch by 9 inch rectangular flanged in-feed opening, can be fitted with a chute for hopper in-feed, or can be covered with a gasketed plate with a pipe fitting for pipe feed.

    • Shown in pictures as currently configured for top infeed, but mounting foot can be attached to any of three sides, to reorient inlet / outlet to top-feed, right-side feed, or left-side in-feed.

  • 3 inch threaded discharge.

  • USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.

  • y5770g_crop_email.jpgManufacturer rated for...

    • 0 - 400 RPM.

    • 200 psi (13.8 bar).

    • .253 gallons (.958 liter) per revolution.

    • 101 gallons per minute (22.9 cubic meters per hour) nominal capacity.

As of this writing, this rectangular in-feed positive displacement lobe pump is in stock at ALARD, in excellent operational and mechanical condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food grade sanitary pump specifications.

ALARD item reference #: Y5770

Used Admix MIXER TANK, 350 gallons, high-shear, Y5892

348 Gallon MIX TANK with
HIGH SHEAR & PROP Mixers,
food grade, stainless steel...



y5892h_crop_email.jpg


A VIATEC Perma-San OVS 348 gallon single wall vertical mix tank equipped with an ADMIX 132XP124 high shear mixer and Lightnin mixer style prop agitator; allows for processing of various batch sizes and viscosities with rapid dispersion and emulsification of ingredients.

FEATURES:

  • Viatex Perma-San OVS single wall vertical stainless steel tank:

    • 44 inch diameter by 52 inch deep with sloped bottom.

    • 348 gallon capacity.

    • 2 inch diameter Tri-clamp bottom outlet

    • Butterfly valve with 4 inch triclamp bottom outlet.

    • y5892e_crop_email.jpgCIP ball for ease of sanitation.

    • Hinged cover.

    • Five (5) 2 inch triclamp fitting infeed ports.

  • y5892a_crop_email.jpgAdmix Model 132XP124 High Speed-High Shear Batch Mixer:

    • Manufacturer recommended for up to 600 gallon batch sizes.

    • 2300 gallons per minute flow rate.

    • 10.2 inch diameter head.

    • 10HP 1760 rpm drive motor.

  • y5892b_crop_email.jpgSharpe Model FGP-250VF Prop Mixer:

    • Two (2) 15 inch propellers.

    • 2HP drive motor.

  • 85 inch high infeed, 26 inch discharge height.

  • All food grade stainless steel construction.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this hi-shear mix tank is in-stock at ALARD in EXCELLENT operational, mechanical, and cosmetic, condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process high-shear mixer tank needs.

ALARD item reference #: Y5892

High-shear MIX TANK, 350 gallons, Y5891

348 GALLON VERTICAL MIX TANK
with HIGH SHEAR & PROP mixers,
food grade, stainless steel.


y5891g_crop_email.jpg

A 348 gallon VIATEC Perma-San OVS stainless steel single wall vertical mixer tank, equipped with an ADMIX 132XP124 shear mixer and Sharpe prop mixer, allows for processing of various batch sizes and viscosities with rapid dispersion and emulsification of ingredients.

 

FEATURING:

  • Viatex Perma-San DVS vertical stainless steel tank:

    • 44 inch diameter by 52 inch deep with sloped bottom.

    • 348 gallon capacity.

    • 2 inch diameter triclamp bottom outlet

    • Butterfly valve with 4 inch triclamp bottom outlet.

    • CIP ball for ease of sanitation.

    • Hinged cover.

    • Five (5) 2 inch triclamp fitting infeed ports.

  • y5891k_crop_email.jpgAdmix Model 132XP124 High Speed-High Shear Batch Mixer:

    • Manufacturer recommended for up to 600 gallon batch sizes.

    • 2300 gallons per minute flow rate.

    • 10.2 inch diameter head.

    • 10HP 1760 rpm drive motor.

  • Sharpe Model FGP-250VF Prop Mixer:

    • MISSING (as-is) two (2) 15 inch propellers.

    • 2HP drive motor.

  • All food grade stainless steel construction.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this hi-shear mix tank is in-stock at ALARD in good serviceable condition available as-is for immediate shipment for buyer completion and assembly, or at additional cost can be completed with a prop agitator, assembled and serviced by our shop; per buyer preference. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food process high-shear mixing tank needs.  

ALARD item reference #: Y5891

Urschel OV SLICER, Y5971

URSCHEL Model OV
cross-cut transverse SLICER,
for elongated food products...


y5971c_crop_email.jpg

The Urschel OV coin-cutter, pickle cutter, slicing machine is manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.

SPECIFICATIONS:

  • y5971l_crop_email.jpgCutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thickness from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or crinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.

FEATURES:

  • y5971f_crop_email.jpg24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Standard "floppy belt" product hold down mechanism for positive product alignment and stability.

  • 48.5 inch high infeed, 20 inch discharge height.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Aftermarket gasketed PVC control box with safety interlock system.

  • 2 HP drive motor.

  • 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel model OV slicing machine is in stock at ALARD in EXCELLENT operational, mechanical, electrical, and cosmetic condition, needing only cutting parts to buyer specification; --call 315-589-4511 to discuss your cutting requirements.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit & vegetable slicing specifications.

ALARD item reference: Y5971

About this Archive

This page is an archive of entries from March 2025 listed from newest to oldest.

February 2025 is the previous archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)