Z-SHAPED ELEVATING CONVEYOR...

A horizontal frame Z-type stainless steel incline and feed elevator belt, with 8 inch wide flighted belt.  Horizontal infeed and discharge sections allow versatility for loading this Z-conveyor, as well as for feeding down line equipment.

Z-frame conveyor CONFIGURATION SPECIFICS:

• 66 inch long horizontal infeed section.
  
  
• 76 inch long incline section.
  
  
• 49 inch long horizontal discharge section.
  
  

This Z-shape elevating feed conveyor FEATURES:

• 8 inch wide interlocking chain type plastic belt with 2 inch high forward leaning cleats on 6.5 inch centers.
  
  
• Belt runs between cleat-height, high-density plastic side rails.
  
  
• 9 inch infeed height, 80 inch high discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Mounted on a stainless steel support frame with casters for added mobility.
  
  
• 3/4 HP stainless steel shrouded motor with variable speed control.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this Z-shaped elevating conveyor is in stock at ALARD, available as-is for immediate shipment; --or to be servivced by our shop prior to shopment as needed to assure excellent operational, mechanical, electrical and cosmetic condition.

CALL 315-589-4511 to confirm availability and discuss your food process feed conveyor needs.

ALARD item reference #: Y5290

3-LEVEL INSPECTION BELT, TRIM TABLE, FRUIT & VEGETABLE PACKING CONVEYOR,
stainless steel, 8-station...
 

A Northstar Engineered Product (NSEP) three-belt inspection table for hand-trimming, coring, sorting, grading, quality inspection and/or packing fruit & vegetable products into boxes or cases, in the context of fresh produce packing, or freshcut / pre-cut produce packaging, frozen food, canning, and other industrial food processing applications. Consists of a main inspection belt with separate underside takeaway waste conveyor.

FEATURING:

• 20 inch wide by 18 foot 5 inch long main / mid-level infeed / inspection belt.
  
  
• 11 inch wide by 13 foot  inch long takeaway top belt - runs forward.
  
  
• 12 inch wide by 12 foot 8 inch long waste takeaway bottom belt - runs backward.
  
  
• 12 inch wide by 60 inch long cutting board frame located on each side.
  
  
• Configured with eight (8) stainless steel waste chutes.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Individual variable speed drum motor drives for each of the three (3) belt conveyors.
  
  
• 460 volt 3 phase electrical input.
  
  
• We have (available separately) elevating feed conveyor(s) configured to "mate" with and feed this inspection table. Call 315-589-4511 to confirm availability and for more information on our Y5564 and/or Y5565 elevating belt feed conveyors.

As of this writing, this 3-belt inspection conveyor is in stock at ALARD in good condition, available for immediate shipment AS-IS...OR can be serviced by our shop prior for a timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food processing product inspection equipment needs.

ALARD item reference #: Y5551

CLEAN OUT OF PLACE TANK
"C.O.P. TANK"
sanitary parts washer,
all stainless steel...

A Sani-Matic Model UW-12-13-N-SE-1 clean-out-of-place parts washer / pipe washer / sanitation tank for washing pipes, hoses, tubing, valves, fittings and other food-grade process parts in the context of a dairy or other USDA sanitary food processing production lines.

FEATURING:

• 12 foot long by 20 inch wide by 18 inch deep stainless steel tank:
  
  
  • Eighteen (18) side spray ports running down each side .
    
    
  • Two (2) spray ports at each end.
    
    
• TWO (2) Waukesha Model C216 stainless steel RECIRCULATION PUMPS:
  
  
  • 2.5 inch inlet / 1.5 inch outlet.
    
    
  • Tri-clamp fittings.
    
    
  • Each pump powered by 7.5 HP stainless steel shrouded motor.
    
    
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this SaniMatic clean out of place tank is in stock at ALARD in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your sanitation needs.

ALARD item reference #: Y5491

STEAM JACKETED KETTLE,
60 gallon Groen, 40psi,
stainless steel vessel...

A 60 gallon Groen 40psi direct steam 2/3 jacketed stationary cooking kettle, food grade, stainless steel vessel, on a painted steel tripod frame.

FEATURES:

• 32 inch diameter by 30 inch deep hemispherical bottom stainless steel vessel with a 1.5 inch center bottom outlet.
  
  
• Manufacturer stamped for 40psi working pressure.
  
  
• Painted steel three-legged support frame set for a 36 inch infeed height. 
  
  

As of this writing, this 60 gallon capacity steam kettle in in stock at Alard, pressure tested and in very good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cooking eqiupment needs.

Alard item reference #: Y2320

TWIN CARTRIDGE PIPELINE STRAINER,
in-line, food grade, stainless steel...

A stainless steel twin pipe-line duplex basket filter with butterfly valve shut-offs for screening low levels of solids out of water or other liquids, in the context of industrial food processing applications...

FEATURES:

• 4 inch diameter Tri-clamp infeed with butterfly valve shut-off.
  
  
• Two (2) 4 inch diameter by 30 inch long filter baskets with 1/8 inch diameter perforated sieve.
  
  
• 4 inch diameter Tri-clamp discharge with butterfly valve to center discharge.
  
  
• Twin filter cartridges and isolating butterfly valves allow the operator to clean a strainer without interrupting flow -OR- run one filter at a time for lower volume applications.
  
  
• All food grade sanitary stainless steel construction.
  
  

As of this writing, this pipeline filter is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4451

COATING DRUM, tumble mixer,
30 gallon
stainless steel drum type batch mixer
with liquid seasoning applicator,
tilt discharge, food grade,
stainless steel drum...

DEMO VIDEO
COATING DRUM with SPRAY COATING system
food grade, stainless steel, Y5880
from Alard Equipment Corp.

A food grade stainless steel tumble mixer, with a liquid flavoring applicator spray coating system, for use as a seasoning drum and tumbler, and/or for use as a  "cement mixer" configuration for batch mixing and blending applications. Mixes food products, flavorings, and/or seasonings with gentle dividing, folding, and tumbling action with manual tilt to dump. Well suited for flavoring, seasoning, mixing and blending of wet or dry particulate products, popcorn, snack foods, particulate products, cut fruit, diced vegetables, salsa, sauces, wet salads (fruit salad, macaroni salad, potato salad) and/or other ingredients and products for industrial food processing production.

FEATURES:

• 18 inch diameter by 30 inch long mixer drum with two (2) internal flippers.
  
  
• Manual tilt discharge.
  
  
• Tubular stainless steel tumbler support stand set for a 67 inch high infeed, 38 inch discharge height.
  
  
• Liquid Applicator with fine spray head and inline filter.
  
  
• Operator controls with spray & cycle timers.
  
  
• 1/3 HP drive motor.
  
  
• All food grade stainless steel construction.
  
  
• 110 volt single phase electrical input.
  
  

As of this writing, this batch tumble mixer is in stock at ALARD, in GOOD operational, mechanical, electrical & cosmetic condition, and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5880