VIDEO DEMO
Rietz EXTRUCTOR Model RE-24, MEAT GRINDER, 75 HP...

DEMO VIDEO
RIETZ EXTRUCTOR Model RE-24,
frozen block grinder, 75 HP, Y5863
from Alard Equipment Corporation.

A Rietz Bepex RE-24-K9E943 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables.

 FEATURING:

• 63 inch long by 29 inch wide by 41 inch deep grinding chamber.
  
  
• 24 inch diameter rotor.
  
  
• 10-spoke discharge plate / die plate / extrusion plate.
  
  
• Bolted on discharge cover with spout, suitable for fitting over, discharging into a 55 gallon drum.
  
  
• 1.25 inch peforations in grind disk.
  
  
• Heavy duty tubular stainless steel frame. 
  
  
• Food grade sanitary stainless steel product contact surfaces with heavy stainless steel support frame.
  
  
• 75 horsepower chain drive motor.
  
  
• 460 volt 3 phase electrical input.
  
  
• Came with bolt-on infeed cover for side-infeed conveyor (feed y5863conveyor not included). 
  
  

As of this writing, this Rietz Bepex EXTRUCTOR is in stock at Alard in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting, grinding, pulverizing & particle reduction size needs.

ALARD item reference #: Y5863

FOOD PROCESS METAL DETECTOR
with BELT CONVEYOR, 14x11 opening,
food grade, stainless steel...

A refurbished LOCK / METALCHEK Model Met 30+ metal detector, on a stainless steel thru-conveyor, with belt-stop alarm reject system. A food grade belt transfer metal detection system for food processing and/or other industrial process applications.

FEATURING:

• 11 inch high by 14 inch wide USABLE aperture opening.
  
  
• Stainless steel detection head enclosure.
  
  
• NEMA4 / IP65 digital operator control panel with 100 product presets.
  
  
• Low frequency search head for optimal sensitivity for meats, sliced meats, bread, baked goods, yogurt, ice cream, cottage cheese, dairy products, fruits, and / or other wet, salty, and other high-product effect food products.
  
  
• Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation; --however this LARGE-opening metal detector has been tested at Alard for a sensitivity of 2.5mm ferrous, 2.5mm non ferrous, and 4mm stainless steel.
  
• Stainless steel conveyor frame.
  
  
  • 12 inch wide by 60 inch long plastic interlocking chain belt:
    
    
  • Left to Right product flow.
    
    
  • 68 feet per minute.
    
    
• 35 inch working height with threaded rod adjustable feet.
  
  
• Food grade sanitary stainless steel construction
  
  
• Belt stop alarm reject.
  
  
• 1/3 HP chain drive motor.
  
  
• 110 volt single phase (household current) electrical input.

As of writing this food grade metal detection system is in stock in excellent operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial process metal detector needs.

ALARD item reference #: Y5350

GEORGE J. OLNEY Model DW-150
FLOTATION WASHER
with DESTONER...

Offering a combination of flotation as well as destoning, the Olney Model DW-150 WASHER with DESTONER for the elimination of light trash such as skins, hulls, leaves, pods / sticks and dirt; as well as heavy impurities including stones, mudballs, sand, dirt & glass; on a variety of products from nuts, shrimp, clams, kernel corn & blueberries to dry beans and/or rehydrated / soaked beans; including kidney, black, pinto, garbanzo, navy, lentils, chickpeas, black-eyed peas, etc. Flotation cleaning is more efficient with rehydration.

FEATURING:

• Manufacturer rated for:
  
  
  • 30,000 pounds per hour of Peas.
    
    
  • 24,000 pounds per hour Lima Beans.
    
    
• 60 inch wide by 72 inch long by 33 inch deep infeed tank.
  
  
• 48 inch wide by 60 inch long riffle board destoner.
  
  
• Flush lift lever for debris removal and/or daily sanitation practices.
  
  
• 54 inch wide by 56 inch long vibrating discharge shaker:
  
  
  • 1 inch by 1/8 inch perforations (upper screen).
    
    
  • 3/16 inch perforations (lower screen).
    
    
• 6 inch inlet / 4 inch outlet centrifugal pump with 15 HP drive.
  
  
• 42 inch long by 84 inch wide by 22 inch deep catch tank, floater chute & rock discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this Olney Model GP Flotation Washer with stone removal is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing needs.

ALARD item reference #: Y5556

ELEVATING BELT CONVEYOR / ELEVATING FEED CONVEYOR with HOPPER, 20 inch wide cleated belt, food grade, stainless steel...

A food grade stainless steel inclined feed conveyor for food processing applications.
 

FEATURING:

• Food grade flighted blue rubber belt:
  
  
  • 20 inch by 13.5 feet long.
    
    
  • Dual rows of 1 inch high flights on 6 inch centers.
    
    
  • Cleats are each 6.75 inch wide.
    
    
• 6 inch high stainless steel hinged sides.
  
  
• Discharge pulley flips up to slacken belt for ease of sanitation.
  
  
• Two-piece stainless steel underpan.
  
  
• Hopper sides at infeed measure 20 inch wide by 22.5 inch long by 15 inch high.
  
  
• 29 inch infeed height, 70 inch discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Bottom mounted 1 HP drive motor.
  
  
• 208/230/460 volt 3 phase electrical input.

As of this writing, this incline conveyor belt is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food process feed conveyor needs.

ALARD item reference #: Y5289

HEAVY DUTY
CROWN PUNCH CAN OPENER,
pneumatic, stainless steel...

An EDLUND Model 625 heavy duty air powered crown punch, semi-automatic, for commercial volume can opening. Manufacturer rated for up to 3,000 cans per day.

 FEATURES:

• Compact design for bench/table use.
  
  
• Set for 603 diameter cans (e.g. #10 cans).
  
  
  • Crowns / punches are available for a full range of standard can sizes. Available as-is or can be completed with change parts to customer specification at extra charge.
    
    
• Two-button / Two-hand switch activation for increased safety.
  
  
• Threaded-rod height adjustment.
  
  
• Pneumatic Operation requires 85 psi and 1.5 to 2 cfm.
  
  
• All food grade stainless steel construction.
  
  

As of this writing, this table-top pneumatic semi-automatic can opener is in stock at ALARD and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food process bulk ingredient handling needs.

ALARD item reference #: Y5814

SINGLE PISTON
VOLUMETRIC FILLER,
DEPOSITOR...

The Unifiller Universal 1000i Series Powerlift food depositor and filling machine is a pneumatically operated food grade stainless steel food depositor and filling machine for filling containers, or for use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulates such as salsa.

FEATURING:

• Manufacturer rated for particulates up to 3/4 inch diameter.
  
  
• Capable of up to 140 cycles per minute.
  
  
• Cut-off on fill nozzle for drip-free filling.
  
  
• Air actuated piston:
  
  
  • 3 inch diameter by 10 inch long stroke piston.
    
    
  • 0.5 to 36 ounce fill per stroke.
    
    
  • Manual crank volume adjustment - no tools required.
    
    
  • Remote foot switch activated.
    
    
• 21 inch diameter by 20 inch deep conical product hopper.
  
  
• Support frame with pneumatic height adjustment.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Full washdown design.
  
  
• Mounted on casters for ease of mobility.
  
  
• 4 cfm @ 80 psi compressed air input required for operation.
  
  
• A wide selection of attachments are available direct from the manufacturer.

As of this writing, this refurbished Unifiller single head piston filler is in stock at ALARD, in EXCELLENT operational, mechanical, pneumatic & cosmetic condition, ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5363

ROD BELT CONVEYOR,
FOOD GRADE STAINLESS STEEL,
72x15...

A 6 foot long by 15 inch wide rod belt Dunkley takeaway conveyor / grading belt, previously used with a Dunkley Cherry pitter (not included, available separately) to convey pitted cherries away from the pitting machine, with belt spacing to allow any loose pits to drop through. Ideal for its original purpose, but could as well be used as a cleaning / grading conveyor (which would allow fines to drop through), a feed conveyor, takeaway conveyor, or transfer conveyor for a wide range of raw, peeled, or cut fruits and vegetables, and/or packaged food products in a pre-cut produce packing or other industrial food manufacturing process environment. The open belt could also be set over a tank as a dewatering conveyor, and / or used with overhead sprays (not included) for rinsing or washing food products.

  FEATURES:

• 72 inch long by 15 inch stainless steel rod belt, with 3/16 inch rods on spacings allowing for 3/8 inch openings.
  
  
• The belt runs between stainless steel sides that flare out to a width of 20.5 inches.
  
  
• All food grade stainless steel construction, with corrosion resistant plastic bearing blocks, 4 inch diameter plastic belt pullies, and stainless steel shafts.
  
  
• Fractional HP 208 / 230volt 3 phase drive.
  
  
• Did not come with, does not include a bottom catch pan or legs, but we can fabricate to buyer specification at extra charge. Can be configured as an elevating conveyor, horizontal conveyor, or lowerating conveyor, per customer requirement. CALL 315-589-4511 to discuss your bulk food product handling needs.

As of this writing, we have this stainless steel rod-belt conveyor in stock in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment; --and we have multiple matching Dunkley cherry-pitter takeaway conveyors identical to this that could be gotten ready quickly. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y5829

SINGLE PISTON
VOLUMETRIC FILLER / DEPOSITOR...

The Unifiller Universal 1000i Series Powerlift food depositor and filling machine is a pneumatically operated food grade stainless steel food depositor and filling machine for filling containers, or for use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulates such as salsa.

FEATURING:

• Manufacturer rated for particulates up to 3/4 inch diameter.
  
  
• Capable of up to 140 cycles per minute.
  
  
• Cut-off on fill nozzle for drip-free filling.
  
  
• Air actuated piston:
  
  
  • 3 inch diameter by 10 inch long stroke piston.
    
    
  • 0.5 to 36 ounce fill per stroke.
    
    
  • Manual crank volume adjustment - no tools required.
    
    
  • Remote foot switch activated.
    
    
• 21 inch diameter by 20 inch deep conical product hopper.
  
  
• Support frame with pneumatic height adjustment.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Full washdown design.
  
  
• Mounted on casters for ease of mobility.
  
  
• 4 cfm @ 80 psi compressed air input required for operation.
  
  
• A wide selection of attachments are available direct from the manufacturer.

As of this writing, this refurbished Unifiller single head piston filler is in stock at ALARD, in EXCELLENT operational, mechanical, pneumatic & cosmetic condition, ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5362

URSCHEL Model J9-A DICER,
STRIP CUTTER...

A reconditioned Urschel J9-A two-dimensional belt-fed cutter, manufacturer rated for firm products up to 1/2 inch thick, with included feed roll, or thicker if product is compressible. This dicing machine / strip-cutter, chopping machine produces a variety of dice sizes and strip cuts. Manufacturer literature recommends for meats (frozen tempered chicken breast, beef jerky, bacon strips, sausage crumbles), baked goods (pita chips, flour tortilla strips, bread dices for croutons, brownies) & vegetables such as peppers, celery, broccoli & parsley; and as a high-capacity greens chopper for mustard greens, collard greens, kale, and spinach.

The Urschel J9A is a high-capacity tons-per-hour cutting machine designed for very clean, precise cuts, in uninterrupted continuous operation in industrial food processing applications; including USDA meat and poultry applications, with easy cleanup and maintenance.

FEATURES:

• 9 inch wide product in-feed belt.
  
  
• To be set with cutting parts per buyer's cut size specifications - CALL 315-589-4511 to discuss your cutting specifications!
  
  
  • Circular knives: from 3/16 inch (4.8mm) to 2 inches (50.8mm) - spacers and number of knives determine.
    
    
  • Crosscut knife spindle spacing: from 1/16 inch (1.6mm) to 3 inches (76mm) - change part.
    
    
• 39 inch infeed height, 24 inch high discharge.
  
  
• Food grade USDA sanitary steel construction; including frame, guards, shrouds & cutting spindles.
  
  
• Aftermarket gasketed PVC control panel with safety interlock system.
  
  
• 5 HP Stearns brake-motor drive.
  
  
• 208/230 volt 3 phase electric input.

As of this writing this Urschel cube cutter / strip cutter is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only change parts per your specification installed prior to shipment.

CALL 315-589-4511 to confirm availability and to discuss your particular industrial food process cutting machine needs.

ALARD item reference #: Y5706

JAYHAWK MUSTARD MILL,
food grade stone mill,
1.5HP...

The JAYHAWK Industrial Stone Mill Model 1MPY is a lab-size stone grinding mill, colloid mill, for emulsifying, homogenization, dispersing & disintegrating of a variety of food applications including mustards, spices, hot sauces, condiments and more.

FEATURES:

• 5 inch diameter proprietary diamond cut stones.
  
  
• Adjustment handle for stone gap to achieve desired grind size.
  
  
• 1.5 inch diameter infeed.
  
  
• 3/4 inch by 4 inch wide discharge.
  
  
• 316 stainless steel grinding head.
  
  
• 1.5 HP direct drive motor.
  
  
• 208/230/460 volt 3 phase electrical input.
  
  

As of this writing, this Jayhawk mustard mill is in stock at ALARD, in GOOD OPERATING condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5238

BAG PACKING TABLE, 2-station, food grade stainless steel, for fill by weight, with scales & bag holders...

An Alard Model BT2, 2-spout food grade stainless steel bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products.

FEATURES:

• This stainless steel two-person BAGGING TABLE measures 40 inches front to back, by 69 inches wide (side to side) with sides that taper from 13 inches high at the back down to 6 inches in the front.
  
  
• Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.
  
  
• Each bag-filling station has a standard 6 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for larger or smaller bag sizes.
  
  
• Each filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.
  
  
• Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjustable to accommodate different bag lengths.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 110 volt single phase (household current) electrical input.
  
  
• Compressed air required for the pneumatic bag holders.
  
  
• NEW.
  
  

OPERATION:

• Each operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.
  
  
• The operator then pulls product from the table into the filling tube until the proper weight is made.
  
  
• Overages can easily be removed.
  
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.
  
  

As of this writing, this Alard model BT2 pre-cut produce PACKING TABLE is in stock new at Alard, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5393

VACUUM TUMBLER,
MEAT MARINATING DRUM,
250 lb capacity,
sanitary, stainless steel...

A MANDEVILLE Model 7000 single door vacuum tumbler for marinating beef, chicken, pork and seafood.

FEATURES:

• 22 inch by 30 inch by 27 inch long tapered drum - 62 gallon / 8.3 cubic foot vessel.
  
  
• Manufacturer rated for 250 pound load capacity.
  
  
• Reverse to discharge.
  
  
• 40 inch infeed height, 26 inch high discharge.
  
  
• All food grade USDA sanitary stainless steel construction.
  
  
• On-board vacuum pump system with manual pressure relief valve.
  
  
• 1/4 HP drive with mechanical variable speed control.
  
  
• 110 volt single phase electrical input.
  
  

As of this writing, this meat marinating vacuum-tumbler is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5489

SINGLE-STATION
NETWEIGH BAG IN BOX FILLING TABLE,
with wash-down scale, and
adjustable height weigh cell,
food grade stainless steel...

A food grade sanitary stainless steel BOX PACKING TABLE / hand-pack bag-in-box filler for filling by weight for food, moist or dry goods particulate products into boxes, buckets, pails, totes or clam-shell packaging. Complete with a remote readout scale, and adjustable height weigh-cell, for filling pre-cut produce and other food products into boxes, buckets, pails, or totes by weight. Ideal for any particulate solids, including whole, diced, or chopped vegetables and fruits, shredded or whole leafy vegetable products, and salad mixes.

OPERATION:

• The operator places the box, bucket, pail or clam-shell container to be filled beneath the filling spout.
  
  
• The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product can be easily removed if needed to "make weight".
  
  
• The operator then puts a new box, bucket, pail, or tote in place, and the process is repeated.
  

FEATURES:

• The stainless steel box, pail, bucket packing table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
  
  
• To fill by weight, this packing table includes a 30 lb capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are / is available to customer specification; CALL 315-589-4511 to discuss your particular fruit and/or vegetable bag weigh-filler specifications.
  
  
• 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size containers).
  
  
• Scale platform is a 12 inch wide by 10 inch front-to-back stainless steel weigh cell which is adjustable to accommodate different container heights.
  
  
• 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads. NOTE: Pictures show optional casters, available at extra-cost; --call 315-589-4511 to discuss your specific pack table specifications.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.

As of this writing, this clam-shell container packing table is in stock new at Alard, available for immediate shipment.  

CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

Alard item reference #: Y5310

URSCHEL COMITROL PROCESSOR
Model 3610 Slant mount, 10 HP...

A compact Comitrol processor mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

• Tapered infeed hopper 8.5 inches front-to-back by 12 inches wide with safety baffles.
  
  
• 3 inch cutting head -- manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions / powders / granules.
  
  
• Discharge is configured with a 7 inch long (front to back) by 6 inch wide (left to right) discharge opening, which is surrounded by a 13 inch square flange.
  
  
  • Beneath the discharge is a REMOVEABLE 29 inch long by 11.25 inch wide slide track which allows a six inch height clearance from the flange. The slide track just hangs on hooks from the support frame of the machine, and can be easily "picked off".
    
    
  • Previously used to discharge into a "wash tub" sized tote, approximately 1 inches wide by up to 13 inches long by about 6 inches deep
    
    
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy clean-up and operation.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Factory control box with safety interlock system.
  
  
• 10 HP drive with brake-motor.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this Urschel Comitrol 3610 milling machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting equipment needs.

ALARD item reference #: Y5813

Z-CONVEYOR,
incline feeder belt with hopper...

A BOCK/NSEP Z-shaped elevating feed conveyor with hopper. This food grade, stainless steel elevating belt feeder has a 16 inch wide flighted belt. Horizontal infeed and discharge sections allow versatility for loading this conveyor, as well as for feeding down-line equipment, such as a radial combination scale.

Z-FRAME CONVEYOR CONFIGURATION SPECIFICS:

• 66 inch long horizontal infeed section with removable solid underpan.
  
  
• 76 inch long vertical incline section.
  
  
• 18 inch long horizontal discharge section.
  
  

This Z-CONVEYOR FEATURES:

• 16 inch wide blue solid interlocking chain type plastic belt:
  
  
  • 3 inch high cleats on 12 inch centers.
    
    
  • Hinged idler end for ease of sanitation.
    
    
• 18 inch infeed height, 57 inch high discharge.
  
  
• Quick-release 30 inch wide by 54 inch long by 21 inch deep stainless steel infeed hopper.
  
  
• Open channel stainless steel frame.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 1/2 HP top mount drive motor.
  
  
• 208/230/460 volt 3 phase electrical input.
  
  

As of this writing, this Z-shaped elevating conveyor is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process feed conveyor needs.

ALARD item reference #: Y5569

THREE-LEVEL INSPECTION BELT,
TRIM TABLE, FRUIT and VEGETABLE PACKING CONVEYOR,
stainless steel...

A three-conveyor inspection table for hand-trimming, coring, sorting, grading, quality inspection and/or packing fruit & vegetable products into boxes or cases, in the context of fresh produce packing, or freshcut / pre-cut produce packaging, frozen food, canning, and other industrial food processing applications. Consists of a main inspection belt with separate underside takeaway waste conveyor. The main belt includes an in-feed section leading to an 8-person 8 workstation work area.

FEATURES:

• 20 inch wide by 18 foot 5 inch long main / mid-level infeed / inspection belt.
  
  
  • The first 6 feet of the main belt are an in-feed section with 12 inch high stainless steel sides.
    
    
  • The next approximately 11.5 feet of main conveyor length is work area, with...
    
    
  • ...the remainder of the main belt a short discharge extension about 16 inches long.
    
    
• 11 inch wide by 13 foot 2 inch long takeaway top belt - runs forward.
  
  
• 12 inch wide by 12 foot 8 inch long waste takeaway bottom belt - runs backward.
  
  
• 12 inch wide by 60 inch long cutting board frame located on each side.
  
  
• Configured with eight (8) stainless steel waste chutes from the level of the main / middle belt down to the bottom takeaway belt; these consist of (4) chutes on either side of the main belt.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Individual variable speed drum motor drives for each of the three (3) belt conveyors.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this 3-belt inspection conveyor is in stock at ALARD in good condition, available for immediate shipment AS-IS...OR can be serviced by our shop prior for a timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food processing product inspection equipment needs.

ALARD item reference #: Y5552

SINGLE-STATION
NETWEIGH BAG FILLING TABLE,
with wash-down scale, and
adjustable height pneumatic bag-holder,
all food grade stainless steel...

A food grade sanitary stainless steel BAG PACKING TABLE / hand-pack bag filler for fresh-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder, for filling pre-cut produce and other food products into bags by weight. Ideal for whole, diced, or chopped vegetables and fruits, shredded or whole leafy vegetable products, and salad mixes.

OPERATION:

• The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.
  
  
• The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product can be easily removed if needed to "make weight".
  
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place, and the process is repeated.
  
  

FEATURES:

• The stainless steel bag-filler / pack table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
  
  
• For fill-by-weight, a 30 lb capacity Cardinal wash-down over-under scale, with remote readout is mounted at eye level. Other model scales / capacity are / is available to customer specification; CALL 315-589-4511 to discuss your particular fruit and/or vegetable bag weigh-filler specifications.
  
  
• 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size bags).
  
  
• Stainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.
  
  
• Beneath the bag holder is a 12 inch wide by 10 inch front-to-back stainless steel weigh cell platform which is adjustable to accommodate different bag heights.
  
  
• 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads. NOTE: Pictures show optional casters, available at extra-cost; --call 315-589-4511 to discuss your specific pack table specifications.
  
  
• All food grade sanitary stainless steel construction.
  ~ 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.

NEW!

As of this writing, this single-station bag packing table is in stock new at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

Alard item reference #: Y5696

Brothers LeGrow
CENTRIFUGAL VEGETABLE SPIN DRYER,
140 lb capacity...

A food grade batch centrifuge system for leafy and/or pre-cut produce products, such as fresh-cut lettuce, onions, shredded carrots and other similar fresh bagged type products.

FEATURES:

• Removable 24 inch diameter by 22 inch deep (6.28 cubic feet) basket with 3/16 inch perforations.
  
  
• Manufacturer rated for 140 lb. maximum capacity.
  
  
• All food grade stainless steel construction including mounting base with rubber vibration isolation mounts.
  
  
• 5 HP belt drive motor with guard.
  
  
• Hinged lid with elastic lift assistance straps.
  
  
• 2 inch diameter bottom side drain.
  
  
• Operator ON/OFF controls with safety interlock switch on lid (cuts power to machine if lid is opened).
  
  
• 208/230/460 volt 3 phase electrical input.
  
  

As of this writing, this Brothers Spin Dryer is in stock at ALARD, in EXCELLENT mechanical and cosmetic condition, presently being finished with an electrical on-off switch box with lid-interlock interface.

CALL 315-589-4511 to confirm availability, and to discuss your food processing needs.

ALARD item reference #: Y5170

SOCK FILTER, BAG FILTER,
BASKET STRAINER,
28 inch long,
food grade, stainless steel...

A SHELCO Model BFS-2FS-2F-21SO-SP bag filter housing is designed for in-line high flow industrial filtering applications including food, beverage, water, oil, chemical and more.

FEATURES:

• 2 inch flanged inlet/outlet with manual valve.
  
  
• Maximum 150psi per manufacturer literature.
  
  
• Vented four (4) swing bolt closure for rapid changeover.
  
  
• 28 inch high by 6 3/8 inch diameter basket with 1/8 inch perforations
  
  
  • Use in conjunction with a cloth sock for increased/finer filtration.
    
    
  • Includes two (2) baskets and a filtration back / "sock".
    
    
• 1/2 inch diameter center bottom outlet with valve.
  
  
• All food grade sanitary stainless steel construction.
  
  

As of this writing, this Shelco BFS series in-line bag filter is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your liquid food process filtration equipment needs.

ALARD item reference #: Y5446

LYCO
INTERMEDIATE BEAN SNIPPER,
stainless steel.

VIDEO DEMO
Used Lyco INTERMEDIATE BEAN SNIPPER, Y3397
from Alard Equipment Corporation on Vimeo.

A bean snipper for snipping the nubbins from snap green beans and wax beans in an industrial food processing processing line.

FEATURING:

• 80 inch long by 32 inch diameter bean snipping drum.
  
  
• Manufacturer rated for 2,000 to 3,000 lbs per hour throughput capacity.
  
  
• All food grade stainless steel construction, including tubular stainless steel support frame.
  
  
• Stainless steel soft edge internal baffles reduce damage.
  
  
• (630) plastic straight slotted pockets.
  
  
• 68 stainless steel V-knives in 6 rows, mounted on stainless steel knife holders.
  
  
• Pocket cleaning brush maintains efficient volume / capacity.
  
  
• Hinged stainless steel safety side panels.
  
  
• Stainless steel infeed and discharge chutes.
  
  
• 67 inch infeed height, 42 inch discharge height (minimums).
  
  
• 3 HP 208/230/460 volt 3 phase drive.

As of this writing, this Lyco stainless steel bean snipper is in stock at Alard in good condition, available for immediate shipment as-is, or can be refurbished to excellent operational, mechanical, and cosmetic condition for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular bean processing needs.

Alard item reference #: Y3397