A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

BAG PACKING TABLE, 2-station, Alard BT2020, item Y5693

BAG PACKING TABLE,
2-station, food grade stainless steel,
for fill by weight, with scales & bag holders...

y5693c_crop_email.jpg


An Alard Model BT2020 2-spout food grade stainless steel net-weigh bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products.



FEATURES:

  • This stainless steel two-person BAGGING TABLE measures 43 inches long by 75 inches wide with sides that taper from 13.75 inches high at the back down to 5.75 inches in the front.

  • y5693_crop_email.jpgThis bag filling manual pack table features an angled back to feed product closer to the operator's reach. The flat-bottom portion of the table is only 29.5 inches in depth (from front to back), while the angled back-stop allows for additional full-load capacity.

  • Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.

  • Each bag-filling station has a standard 6.5 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for smaller bag sizes.

  • y5693f_crop_email.jpgEach filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.

  • Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjustable to accommodate different bag lengths.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase (household current) electrical input.

  • Compressed air required for the pneumatic bag holders.

  • NEW - not a pre-owned piece.


OPERATION:

  • y5693d_crop_email.jpgEach operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.

  • The operator then pulls product from the table into the filling tube until the proper weight is made.

  • Overages can easily be removed.

  • The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.


As of this writing, this bag filler table is in stock at Alard, now, fully assembled and ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5693

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on January 23, 2024 5:41 AM.

CONTINUOUS BRUSH WASHER, 4-roll, SCRUBBER, Y5592 was the previous entry in this blog.

HOPPER-FEEDER BELT, elevating, Y4381 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.