BIN DUMPER / TOTE DUMPER,
USDA sanitary food grade stainless steel,
for 40 by 48 inch bins, hydraulic powered;
--IN STOCK NEW...

Alard Model BD40A Bin Dumper, USDA sanitary food grade stainless steel, floor-level in-feed, forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURING:

• Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.
  
  
• Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.
  
  
• Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. inside the bin holder); with continuously welded smooth seams all around the interior.
  
  
• Heavy duty tubular stainless steel base frame construction.
  
  
• Dump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).
  
  
• Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.

As of this writing, this USDA sanitary food grade stainless steel floor-level infeed BIN DUMPER is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5641

BIN DUMPER / TOTE DUMPER,
USDA food grade sanitary stainless steel,
for up to 48 inch by 48 inch bins, with hydraulic power;
--IN STOCK NEW...

Alard model BD48A food grade USDA sanitary stainless steel, floor level in-fee, forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, pallet boxes, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURES:

• Sized for 48 inch wide or smaller totes, with bin-holder measuring 54 inches wide by 48 inches long by 42 inches deep.
  
  
• Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.
  
  
• Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.
  
  
• Heavy duty tubular stainless frame construction.
  
  
• Dump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).
  
  
• Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your specific bulk food product container dumping need.

As of this writing, this new forward bin dumper is stock at Alard, complete, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5640

ROTARY VANE FEEDER / METERING DRUM,
food grade, stainless steel...

A Key Technology Vari-Feeder for metering downstream flow and/or consistent proportioning of product mixes including vegetables, fruits, cereal, grains, berries, nuts, candy & more.

FEATURES:

• Manufacturer rated for up to 8,000 pounds per hour capacity.
  
  
• 12 inch wide by 9 inch diameter rotary drum.
  
  
• Rounded / cupped pocket vanes for improved sanitation.
  
  
• 12.5 inch by 7.5 inch long infeed opening.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 1/2 HP drive motor for 32 rpm at the drum.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this rotary airlock feeder valve is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food feeding / metering needs.

ALARD item reference. #: Y5133

Cornell Model 4WB CENTRIFUGAL PUMP,
5 inch in, 4 inch out, with 7.5 HP MOTOR,
food grade, stainless steel...

A Cornell Model W-series stainless steel body centrifugal pump designed for small flow capacity with minimum head pressure for a multitude of fluid handling applications ranging from food products, washing, rinsing, recirculation, irrigation, general industrial & municipal use.

FEATURING:

• Manufacturer rated for 300 to 500 gallons per minute - pump curves available upon request.
  
  
• 7 inch diameter bronze impeller with double curvature vanes.
  
  
• Stainless steel volute.
  
  
• 5 inch diameter inlet / 4 inch diameter outlet with flanged fittings.
  
  
• 7.5 HP 1725 rpm direct drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this centrifugal pump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process pump and bulk material handling needs.

ALARD item reference #: Y4811

ELEVATING CONVEYOR BELT,
14 inch wide, flighted belt,
food grade, stainless steel...

A food grade stainless steel incline feed conveyor for food processing applications with a horizontal in-feed and loading section.

FEATURING:

• 14 inch wide by 80 foot long interlocking chain plastic belt.
  
  
  • 2 inch high cleats on 12 inch centers.
    
    
  • 2.5 inch high sides.
    
    
  • 2 foot long horizontal infeed section.
    
    
• 7 inch high infeed, 48 inch discharge height - threaded rod adjustable feet.
  
  
• Operator control box with ON/OFF and E-stop.
  
  
• 1/3 HP variable speed motor.
  
  
• 220 volt single phase electrical input.

As of this writing, this elevating belt conveyor with horizontal packing in-feed section, is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

ALARD item reference #: Y5673

Scott Turbon HIGH SHEAR MIXER,
food grade, sanitary...

A sanitary stainless steel Scott Turbon Model HRSL 275 SANITARY HYDRAULIC RAM (HR) MIXER / EMULSIFIER / DISPERSER on a hydraulic ram / pneumatic power lift. Made by Scott Mixers, this full scale hydraulic ram batch mixer has an adjustable height mixing head, which allows for processing of various batch sizes and viscosities, with rapid dispersion and emulsification of ingredients.

FEATURING:

• Scott Turbon Model B mixer head for viscous/ thick liquids and emulsions; large diameter with toothed disc. Other mixer heads are available from the manufacturer. CALL 315-589-4511 to discuss your specific blending / emulsifying requirements.
  
  
• Manufacturer rated for applications such as mixing salad dressings, thick emulsions or other viscous products in dispersion, dissolution, suspension, particle size reduction, homogenization and emulsification applications.
  
  
• Stainless steel operator control panel with on/off & raise/lower.
  
  
• Food grade USDA sanitary stainless steel, 3A dairy sanitary construction, but applicable beyond food and beverage for other uses such as pharmaceutical and biotech mixing, as well as for cosmetic and personal care product mixing.
  
  
• 7.5 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  
• Requires compressed air input for ram operation.

As of this writing, this high-shear emulsifier blender is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process emulsifying / blending needs.

ALARD item reference #: Y5492

URSCHEL Model GK-A DICER,
strip cutter, French fry cutter, flat or crinkle cuts...

The Urschel GK-A is a three-dimensional cutting machine, manufacturer rated for product input size of up to 5.5 inches (140mm) in any dimension. Manufacturer recommended for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s) the Urschel GKA can also cut strips (two-dimensional cuts) such as for french fries and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or crinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss your cutting specifications!
  
  

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5661

KEY Iso-Flo
VIBRATORY DEWATERING SHAKER,
VIBRATING FEED CONVEYOR, 76x53,
food grade stainless steel...

A Key Technology Iso-Flo Model S1037504 vibratory shaker-grader feeder for grading, size sorting, fines removal, solids separation, water reclaim / dewatering, declumping and / or even-feeding downstream components.

FEATURES:

• 53 inch wide by 76 inch long vibrating conveyor bed.
  
  
  • 4 inch high stainless steel sides.
    
    
  • 12 inch long dimpled / rigidized solid infeed section.
    
    
  • Two (2) 53 inch wide by 24 inch long stainless steel woven-wire screens with 3/8 inch square sieve openings.
    
    
  • 16 inch long dimpled / rigidized solid discharge section.
    
    
• Water collection pan with 6 inch diameter tri-clamp center bottom outlet.
  
  
• Quick release clamps for easy, tool-less removal & cleaning of screens.
  
  
• Vibratory action provided by two (2) 2/3 HP rotary / eccentric vibrator motors.
  
  
• All food grade sanitary stainless steel construction including heavy duty tubular frame.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this vibratory shaker-grader is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5157

DEMO VIDEO
Key Iso-Flo VIBRATORY SIZE GRADER, 4x3,
food grade stainless steel,
SIZE-GRADING stainless steel washers.
Alard item Y4113

DEMO VIDEO Key Shaker-Grader Y4113
running leafy vegetable / lettuce
from Alard Equipment Corporation.

A Key Iso-Flo vibrating shaker with quickly interchangeable screen for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering, and even-feeding to downstream components.

FEATURES:

• 34 inch wide by 4 foot long shaker bed.
  
  
  • 6 inch long smooth infeed.
    
    
  • 36 inch long screen with 1-1/8 inch diameter perforations and quick release screen-retainer hooks for fast screen replacement / changeover.
    
    
  • 6 inch long smooth discharge lip.
    
    
• 4 inch high sides.
  
  
• Solid discharge pan for separation of graded materials.
  
  
• Overhead design.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Ajax eccentric with 1HP drive.
  
  
• 230 / 460 volt 3 phase electrical input.

As of this writing, this vibratory grader is in stock at ALARD, in EXCELLENT mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process grading equipment needs.

ALARD item reference #: Y4113

STATIC SCREEN SEPARATOR,
Alardsieve 24x36, all stainless steel...

A new Alardsieve 2436 water recovery screener / scalper sieve, for solids separation, wash-water filtration, and/or waste-water recovery. A Hydrasive type static screen sieve for separating solids from water and/or other liquids such as cooking oils.

This stationary screen is configured with a special triangular-rod / wedge-wire screen specifically designed for liquid-solid separation screening, with very precise and consistent sieve opening sizes. Product / solids in a liquid such as water or oil pass over the stationary screen. The liquid passes through the screen to a collection tank and drain, leaving the solids to pass over the screen for collection beneath.

An ideal separator for wash-water reclaim / reuse, by-product recovery, and / or otherwise removing solids from waste water in industrial food processing plant applications such as peeling, coring, and grading operations for removing stems, seeds, leaves, and other foreign materials from rinse water. Also commonly used in other municipal and plant waste-water treatment facilities for solids removal filtration.

FEATURES:

• 24 inch wide by 36 inch long (top to bottom) wedge-wire screen.
  
  
• .040 inch sieve-opening-size screen installed; --other standard sieve opening sizes can be sourced and installed to order, from .010 inch to .100 inch, with other sizes to be priced upon request. CALL 315-589-4511 to tell us YOUR sieve size specification.
  
  
• Screens are slide-out / slide-in interchangeable for a wide range of solids separation applications.
  
  
• 33 inch deep full-width infeed / head tank, tapering from 20 inches front-to-back at the top to 15 inches front to back at the bottom. The headbox is open and easily cleaned of debris such as stones or other such "heavies".
  
  
• Complete with dispersion shield over the weir to spread water evenly across entire screen, for optimal laminar flow.
  
  
• 4 inch threaded inlet, 6 inch threaded outlet; --allows for optional flange fittings to be screwed on, or for hose fittings to be cinched on to infeed and discharge connections.
  
  
• 4 inch diameter clean-out ports on either side (for easy access behind screen), with 1 inch tank drains at bottom level for comprehensive rinsing, cleaning and drainage of wash water.
  
  
• 1.25 inch diameter cleanout drain in each tank.
  
  
• Throughput capacity depends on screen sieve opening chosen. For example, with a .040 inch (1mm) sieve opening, a throughput capacity of approximately 400 gallons per minute capacity is feasible running non-greasy solids (actual throughput will depend on solids and flow characteristics).
  
  
• All food grade 304 stainless steel construction.
  
  
• Static screen / stationary screen water recovery sieve has no moving parts, making it a low cost, low maintenance and long-lived dewatering system.

As of this writing, this solids separation / static dewatering screen is new in stock at Alard, configured with a new .40" sieve screen, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your liquid solid separation equipment needs.

Alard item reference #: Y5639

Food Grade
GRADE ELEVATING SCREW CONVEYOR,
12x12, stainless steel, 8 foot discharge height,
HOPPER IN-FEED.

A stainless steel hopper incline-screw-feeder for raw or processed food product in-feed and discharge to downstream equipment.

FEATURES:

• Tapered infeed hopper 36 inches long by 31 inches wide by 23 inches deep with stainless steel safety grid.
  
  
• 12 foot long by 11.5 inch diameter screw auger with 4.25 inch high flights on 5.5 inch centers.
  
  
• Three (3) bolt-on removable top covers completely encapsulate the screw-auger for safety.
  
  
• 36 inch high infeed, 8 foot discharge height
  
  
• All food grade sanitary stainless steel construction including tubular frame.
  
  
• 1.5 HP motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this incline auger feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product handling, transfer & conveying equipment needs.

ALARD item reference #: Y5495

PIPELINE METAL DETECTOR,
Fortress Phantom, 3 inch line, with reject valve,
food grade, stainless steel...

A stainless steel Fortress Phantom inline metal detection system with through-tube and reject valve, for detecting metal contamination in pumpable food products, including sauces, slurries, creams, oils, purees, salsas, refried beans, and other viscous or liquid food products, hot or cold.

FEATURES:

• 34 inch long by 2 7/8 inch inner diameter through-tube and valve.
  
  
• Lee stainless steel reject valve, pneumatically actuated.
  
  
• Mounted on a bolted-on stainless steel base, can be easily removed, modified, or used as configured.
  
  
• Integral touchpad operator controls, with 99 product presets.
  
  
• Food grade / USDA sanitary stainless steel, hose washdown; previously used in a USDA-inspected meat processing facility.
  
  
• 110 volt single phase (standard household current) electrical input.

As of this writing, this Fortress Phantom food METAL DETECTOR for pipeline metal detection is in stock at Alard, in very EXCELLENT operational, electrical, pneumatic, mechanical and cosmetic condition, available for immediate shipment

CALL 315-589-4511 to confirm availability, and to discuss your particular food pipeline metal detection equipment needs.

Alard item reference #: Y2576

Commercial Slicer NS-26, 26 INCH
SAUERKRAUT CUTTER, COLESLAW CUTTER,
industrial-capacity food grade stainless steel vegetable
SLICER / SHREDDER / STRIP CUTTER...

A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, does one or two-dimensional cuts in high-capacity industrial food processing applications. Best known as a cole-slaw and/or sauerkraut cutter, it is also widely used for shredding lettuce in quantity for sandwich shreds. Manufacturer recommended for industrial capacity tons-per-hour throughput cutting lettuce, cabbage, onions, peppers, cucumbers, potatoes, carrots, tomatoes and celery.

FEATURES:

• 26 inch diameter aluminum frame cutting disk with stainless steel knives - 100% cutting surface.
  
  
• Flared in-feed hopper, tapered hopper discharge.
  
  
• "Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.
  
  
• Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products up to 9 inch diameter.
  
  
• Manufacturer rated for up to 25,000 pounds per hour (depending on cut size and product).
  
  
• Set with 3/16 inch wide by 3 inch long shred cutting knives:
  
  
  • A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length.
    
    
  • Grater blades are also available for shredding carrots, slaw, onions, and other fresh vegetables.
    
    
  • CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.
    
    
• 66 inch infeed height, 34" discharge height from slide-out discharge chute.
  
  
• Food grade stainless steel construction, including tubular stainless steel frame.
  
  
• Two (2) gear-motor washdown drives - cutting wheel & plow powered separately.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this capacity slicing and strip cutting machine is in-stock in excellent, refurbished condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing and strip cutting needs.

ALARD item reference #: Y4498

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

The Urschel model G-A dicing machine is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) - change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement.

This cutting machine FEATURES:

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• 2 HP stainless steel shrouded motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

ALARD item reference #: Y5342

ELEVATING SCREW FEEDER with hopper, Y5495
Olney VIBRATING SHAKER-GRADER, dewatering shaker, Y4580
Combined VIDEO DEMO

DEMO VIDEO,
Elevating Screw Feed Conveyor Y5495 and
Olney VIBRATING DEWATERING SHAKER-GRADER Y4580
from Alard Equipment Corp.

This demo video shows the Y5495 INCLINE SCREW CONVEYOR feeding product onto the Y4580 Olney VIBRATORY GRADER, dewatering screen...

• SCREW CONVEYOR DETAILS...
  
  

FOOD GRADE ELEVATING SCREW CONVEYOR, 12x12, stainless steel, 8 foot discharge height.

A stainless steel hopper incline-screw-feeder for raw or processed food product in-feed and discharge to downstream equipment.

FEATURES:

• • Tapered infeed hopper 36 inches long by 31 inches wide by 23 inches deep with stainless steel safety grid.
    
    
  • 12 foot long by 11.5 inch diameter screw auger with 4.25 inch high flights on 5.5 inch centers.
    
    
  • Three (3) removable top covers.
    
    
  • 36 inch high infeed, 8 foot discharge height
    
    
  • All food grade sanitary stainless steel construction including tubular frame.
    
    
  • 1.5 HP motor.
    
    
  • 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this incline auger feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product handling, transfer & conveying equipment needs.

ALARD item reference #: Y5495

• VIBRATING SHAKER / VIBRATORY DEWATERING CONVEYOR DETAILS...
  
  

OLNEY VIBRATORY DEWATERING SHAKER / VIBRATING FEED CONVEYOR, 54x56, food grade stainless steel.

An Olney VIBRATING SHAKER, a vibratory shaker-grader feeder for grading, size sorting, fines removal, solids separation, water reclaim / dewatering, declumping and / or even-feeding downstream components...

FEATURES:

• • 54 inch wide by 56 inch long vibrating conveyor bed:
    
    
  • Quick release clamps hold the screens, for easy, tool-less removal, replacement, and/or sanitation.
    
    
    • 4.25 inch high stainless steel sides.
      
      
    • Two (2) 54 inch wide by 28 inch long removable stainless steel water reclaim / separator screens, one after the other, each with 1/8 inch wide flat rods and 1/8 inch sieve openings running perpendicular to product flow.
      
      
    • 2.5 inch long smooth solid discharge section.
      
      
  • Full length stainless steel water collection pan with 6 inch center bottom outlet.
    
    
  • 70.5 inch infeed height, 68.5 inch high discharge.
    
    
  • Heavy duty tubular stainoess steel frame.
    
    
  • Vibratory action provided by 1.5 HP motor with Ajax eccentric drive.
    
    
  • Food grade sanitary stainless steel construction.
    
    
  • 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this vibrating conveyor - screener is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process conveying equipment needs.

ALARD item reference #: Y4580

Available separately or together, in stock in EXCELLENT operational, mechanical, electrical, and cosmetic condition at Alard Equipment Corp.

Vanmark HYDROLIFT VERTICAL SCREW FEEDER,
26 inch diameter, 13 foot lift,
stainless steel.

VIDEO DEMO
Vanmark Hydrolift 4000 SCREW FEEDER DESTONER
Alard item Y4699.

The Vanmark Hydrolift Series 4000 vertical screw elevator provides a space-saving vertical feed conveyor which also provides a final rinse and settling point for rock and stone removal from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.

OPERATION:

The vertical auger creates water turbulence that separates stones and debris from product, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt & debris settle at the bottom of the tank for manual removal. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution
can help prevent discoloration and provide a final washing to improve the quality of your finished product.

FEATURES:

• Combination vertical elevator / dip tank configuration provides double-utility in a small footprint for maximum plant floor-space utilization.
  
  
• 34 inch long by 29 inch wide by 33 inch deep stainless steel wet hopper infeed, with water inlet and bottom drain connections.
  
  
• 26-inch diameter auger allows for a wide range of food products, with high throughput tons-per-hour capacity - currently configured for approximately 220 rpm.
  
  
• 156 inch (13 foot) product discharge height with a flanged outlet opening, on a stainless steel support frame; --feet must be bolted to the floor for safety / stability.
  
  
• Discharge can be repositioned for straight-line, right-angle, left-angle or reverse discharge positions.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 10HP belt drive motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this stainless steel Hydrolift destoner-feeder, continuous incline screw auger is in stock at ALARD, in EXCELLENT operational condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process vegetable washing equipment needs.

ALARD item reference #: Y4699

METTLER TOLEDO SAFELINE COMBINATION METAL DETECTOR CHECKWEIGHER, Food Product Inspection System...

DEMO VIDEO,
Safeline Mettler-Toledo
COMBINATION CHECKWEIGHER and METAL DETECTOR Y5519,
from Alard Equipment Corp.

A Safeline Mettler Toledo combination metal detection and checkweighing system for compact, space-saving weighing and metal contamination detection...

FEATURES:

• Safeline FOOD METAL DETECTOR with 5" high by 13.75 inch wide net USABLE aperture opening with the conveyor belt in place.
  
  
  • Food grade epoxy painted metal detection head enclosure, with integral touch pad operator control panel.
    
    
  • 60 inch long by 12 inch wide rubberized product transfer belt carries product through metal detector onto checkweigher weigh-cell belt.
    
    
  • Metal detector thru-conveyor includes a pneumatic blow-off reject system integrated with the metal detector.
    
    
  • Stainless steel stand-alone Safline metal detector power supply box; cord connected for flexibility of placement.
    
    
• Mettler Toledo Beltweigh XS CHECKWEIGHER with 17 inch long by 12 inch wide weigh-cell.
  
  
  • Touch-screen control on stand-alone pedestal, cord-connected allowing flexibility for placement.
    
    
• 24 inch long by 12 inch wide discharge belt.
  
  
  • The discharge / takeaway conveyor has a pneumatic blow-off reject integrated with the checkweigher, pushing off to the left (from the perspective of one looking downstream) of the product flow.
    
    
  • Discharge conveyor includes an emergency stop safety switch.
    
    
• All food grade construction.
  
  
• Conveyor frame is powder coated steel.

As of this writing, this combination metal detection and check-weigh system is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #:Y5519