BOCK FP-35
PLASTIC BASKET SPIN DRYER,
20 gallon basket, up to 35 lb capacity,
all stainless steel...

A refurbished BOCK FP-35 "Mini Brute" SPIN DRYER, with light, easily hand-removable plastic basket; for industrial fresh-cut and pre-cut produce processing and packaging lines. This food grade stainless steel centrifugal dryer is an essential component of any fruit or vegetable cut, wash & dry production including commissaries, kitchens, farms and processors.

FEATURES:

• Manufacturer rated for up to 35 pound (dry weight) loads.
  
  
• Will come with one white Rubbermaid Brute type 20 gallon plastic basket (on order, not shown in pictures) so it can be loaded and unloaded by hand, withOUT necessity of overhead winch.
  
  
  • This basket size fits easily under cutting machines, dewatering shakers plus other upstream feed equipment.
    
    
  • Baskets are available in a variety of colors and perforation sizes.
    
    
  • Call 315-589-4511 for pricing to your specification.
    
    
• Pneumatic self raising lid for ease of operation.
  
  
• Stainless steel control box with safety interlock system, speed selector, start, stop and emergency stop.
  
  
  • Settable timer (inside the control box).
    
    
  • Centrifuge control system provides for electronic acceleration and dynamic braking to reduce cycle times for maximum productivity.
    
    
• 1.5HP belt drive motor.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 460 volt 3 phase electrical input.
  
  
• 80psi @ 0.5cfm compressed air required.

As of this writing, this BOCK FP35 spinner is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fresh-cut/ pre-cut produce packing equipment needs.

ALARD item reference. #: Y5544

DEMO VIDEO
Key Iso-Flo VIBRATORY SIZE GRADER, 4x3,
food grade stainless steel,
SIZE-GRADING stainless steel washers.
Alard item Y4113

VIDEO DEMO
Key Iso-Flo vibratory SIZE GRADER,
Alard item Y4113
from Alard Equipment Corporation.

A Key Iso-Flo vibrating shaker with quickly interchangeable screen for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering, and even-feeding to downstream components.

FEATURES:

• 34 inch wide by 4 foot long shaker bed.
  
  
  • 6 inch long smooth infeed.
    
    
  • 36 inch long screen with 1-1/8 inch diameter perforations and quick release screen-retainer hooks for fast screen replacement / changeover.
    
    
  • 6 inch long smooth discharge lip.
    
    
• 4 inch high sides.
  
  
• Solid discharge pan for separation of graded materials.
  
  
• Overhead design.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Ajax eccentric with 1HP drive.
  
  
• 230 / 460 volt 3 phase electrical input.

As of this writing, this vibratory grader is in stock at ALARD, in EXCELLENT mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process grading equipment needs.

ALARD item reference #: Y4113

DIP TANK with ELEVATING DISCHARGE CONVEYOR,
IMMERSION WASHER, RINSER,
food grade stainless steel.

DEMO VIDEO
DIP TANK / IMMERSION WASHER / RINSER,
item reference Y5248
from Alard Equipment Corporation.

A wash tank with elevating discharge conveyor, for whole or sliced, diced, chopped or otherwise pre-cut fruit & vegetable product washing , rinsing, and / or immersion in preservative or chlorinated disinfectant solution as part of a pre-cut produce packing or other industrial food processing and packaging line.

FEATURES:

• Stainless steel wash tank measures 6 feet long by 24 inches wide by 24 inch deep.
  
  
• Stainless steel elevating discharge conveyor measures 9 feet long by 18 inches wide with an interlocking plastic chain type food grade conveyor belt.
  
  
  • 1 inch high flights on 12 centers.
    
    
  • 1/4 inch by 1/4 inch openings in the belt to allow for water drainage.
    
    
  • 5 inch high plastic sides.
    
    
  • Powered by 1HP stainless steel shrouded motor.
    
    
• The conveyor can be manually tilted out of the tank to allow access for cleanng and sanitation.
  
  
• 28 inch infeed height to tank and 36 inch discharge height from the belt conveyor.
  
  
• Recirculation pump with 2 inch inlet/outlet powered by 3/4HP motor.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 / 460 volt 3 phase motor.
  

As of this writing, this food grade sterilization solution dip tank / washer is in stock at ALARD, ready for immediate shipment in AS-IS condition -OR- can be serviced by our shop technicians for EXCELLENT condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process fruit & vegetable washing and/or sanitizing needs.

ALARD item reference #: Y5248

CORNELL 4 inch STAINLESS STEEL FOOD PUMP...

A refurbished Cornell Model 4NMP-F5K-SS, stainless steel hydro transport food pump with 4 inch inlet and outlet connections. The Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.

FEATURES:

• Manufacturer rated for:
  
  
  • Approximately 100 to 800 gallons per minute depending on RPM and head resistance (pump curves available on request -- CALL 315-589-4511), with whole or cut food product / solids handling ability for up to 2.94 inches (74.7mm)in diameter by 4 inches (171.6mm) long.
    
    
  • Designed and manufactured with the sole purpose of pumping food products. Ideal for fresh produce applications such as fruit washing and packing as well as food manufacturing operations such as whole or cut food product conveying, cooling and / or sanitization in water applications.
    
    
  • This offset volute pump is manufacturer recommended as capable of gently conveying-in-water whole or cut food products including potatoes, French fries, potato chips, live fish, cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn, peaches, beets, oranges, and more (larger products may require a larger pump;--see size specification of this specific pump above). Please note we stock several sizes of Cornell food pumps - CALL 315-589-4511 to discuss your food product in water transport need in detail.
    
    
• 304 stainless steel pump, with 304 stainless steel single port impeller for handling whole or precut / processed foods.
  
  
• 304 stainless steel pump backplate for all food grade stainless steel product contacts.
  
  
• The Cornell food pump has 4 inch flanged suction inlet and discharge outlet connections appropriate for a 4 inch water pipeline.

As of this writing, this used stainless steel food pump is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food handling needs.

ALARD item reference #: Y3807

COATING DRUM SEASONING REEL,
continuous rotary seasoning applicator drum,
all stainless steel...

DEMO VIDEO
COATING DRUM / Seasoning Applicator
from Alard Equipment Corporation on Vimeo.

This type of food grade continuous tumble mixer is widely used as a seasoning application system for gently applying dry and liquid spices & flavorings, to a wide variety of food products including potato chips, tortilla chips, crackers, nuts, seeds, snack mixes, popcorn, coffee beans, pet foods / pet snacks, cereals, frozen foods, pasta, and shredded cheeses. The ribbed interior of this seasoning applicator mixing reel allows for the application of vegetable oils, spices, seasonings and flavoring formulations to delicate products with a minimum of product stress or breakage.

FEATURES:

• 30 inch diameter by 67 inch long stainless steel coating reel / seasoning drum (including discharge cone).
  
  
  • 20.75 inch diameter infeed.
    
    
  • 5 inch long tapered discharge cone with 26.5 inch diameter discharge opening.
    
    
  • Sixteen (16) 1 inch high fixed triangle shaped flights.
    
    
• Manually adjustable drum pitch from 3 to 7 degrees.
  
  
• Trunnion drive with centering rollers.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 3 HP stainless steel drive with stainless steel shrouded motor.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  

As of this writing, this continuous coating drum is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4488