CORNELL 8" EXPANDED VOLUTE FOOD PUMP,
Model 8NHPP-F18K...

The Cornell 8-inch food pump is a food grade pump-in-water conveyor pump for pumping whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply preservative solutions while conveying horizontally and/or vertically for long or short distances. Ideal for food processing applications such as fruit and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and chilling applications, and/or pre-heating prior to cutting, peeling, etc; including shredded lettuce and cabbage, cut romaine, whole or cut potatoes, french fries, potato chips, live fish (!), cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins,beans, corn, peaches, beets, oranges, and more.


FEATURES:

• Cornell 8NHPP-F18K cast-iron hydro flow food pump with stainless steel impeller, eight-inch inlet and outlet. Stainless steel body pump also available; --call 315-589-4511 do discuss your specific requirements.
  
  
• Manufacturer rated for solids handling ability for product sized up to 5 inch diameter by 9 inches in length. Larger diameter pumps are available for larger product sizes; --call 315-589-4511 to discuss your specific application requirements.
  
  
• Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!
  
  
• Specifically designed and built for industrial food processing application use, with tons-per-hour throughput capacity.
  
  
• Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 to discuss your specific application requirements.
  
  
• Feed tank and drive available separately (not included unless otherwise specified); --call 315-589-4511 to discuss your specific configuration requirements.

The Cornell hydro transport food pump is frequently employed to power open water flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix and pack the final product.

Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the cooling flume system just to convey product in water.

In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

Alard also stocks and handles various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application.

With Cornell's large range of hydro-transport pump size and material configurations, and with Alard's ability to configure and "gear" the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport based flume kits are a superb tool for a wide variety of industrial food processing applications.

As of this writing, this 8 inch Cornell FOOD PUMP is in stock NEW at Alard available for immediate shipment as a pump only, or can be integrated with a feed tank and drive (at extra charge) for a timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular hydro food pump application requirements.

Alard item reference #: Y4997

URSCHEL COMITROL PROCESSOR Slant model 3610, 10HP.

A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications...

FEATURES:

• Tapered infeed hopper 8 inches front-to-back by 12 inches wide with safety baffles.
  
  
• 3 inch cutting head -- manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions / powders / granules.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy clean-up and operation.
  
  
• 58 inch high infeed, 29.5 inch discharge height.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Factory control box with safety interlock system.
  
  
• 10 HP drive with brake-motor.
  
  
• 230 / 460 volt 3 phase electrical input.
  
  

As of this writing, this Urschel Comitrol 3610 milling machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting equipment needs.

ALARD item reference #: Y5061

URSCHEL DIVERSACUT 2110 DICER...

The Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

MANUFACTURER SPECIFICATIONS:

• Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
  
  
• Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
  
  
• Crosscut knife -- change part:
  
  
  • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    
    
  • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    
    
  • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    
    
  • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    
    
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
  
  
• This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!

FEATURES:

• Came set for flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.
  
  
• 5 HP stainless steel shrouded drive motor,
  
  
• Factory stainless steel operator control panel with safety interlock system.
  
  
• All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y5164

Heat & Control / Spray Dynamics 38x128 Soft Flight COATING DRUM with Micro-Meter Liquid Applicator.

The Spray Dynamics soft-flight coating reel is manufacturer recommended for the uniform application of coatings and seasonings on extruded, baked, frozen and fried products. This tumble mixer configuration is an industry standard seasoning reel, and includes a liquid applicator for applying flavorings in a liquid form for a wide variety of snack foods such as potato chips, snack chips, crackers, nuts, snack mixes, popcorn, coffee beans, pet foods / pet snacks, cereals, seeds and even cheese snacks. A dry seasoning applicator could also be added to this machine (but is not included).

FEATURES:

• 38 inch diameter by 128 inch long stainless steel coating reel / seasoning drum with fifteen (15) triangular lifting flights.
  
  
• 26 inch diameter infeed and 34 inch diameter discharge with four (4) interchangeable discharge chutes.
  
  
• Manual crank adjustable drum pitch.
  
  
• Model MS-III Micro-Meter Liquid Applicator includes feed tank, pump, two (2) basket/bag filters and six (6) nozzle liquid seasoning application spray head mounted inside the drum.
  
  
• 1HP reel drive.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Arrived without and does not include control panel.
  
  
• 480 volt 3 phase electrical input.

As of this writing, this Spray Dynamics coating drum with liquid ingredient feeders is in stock at ALARD, in UNUSED condition, otherwise LIKE NEW, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5147

FOOD PROCESS METAL DETECTOR
with BELT CONVEYOR, 25x16,
food grade sanitary stainless steel.

A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed food grade sanitary stainless steel conveyorized metal detection system for detecting metal contamination in food or other products in the context of industrial process line applications.

FEATURES:

• 15.5 inch high by 25 5/8 inch wide (387mm high by 651mm wide) net USABLE aperture opening with the conveyor belt in place...
  
  
• The stainless steel frame wash-down belt transfer conveyor has a 104 inch (2642mm) long by 23.5 inch (597mm) wide interlocking plastic chain type belt, running at a 31 inch (787mm) working height, with adjustable feet allowing + 4 inch (100mm) height adjustment.
  
  
• The thru-conveyor is complete with a belt-stop alarm reject system configuration, and a VFD variable speed control for the belt drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed. We can configure other reject systems to suit your particular product needs; CALL 315-589-4511 to discuss your specific product application.
  
  
• A food grade metal detector specifically built for food processing and other industrial production line and packaging line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).
  
  
• The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.
  
  
• FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing precise tuning for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc.) allowing for maximum versatility with the widest range of products. The optimal frequencies automatically set by the system in "product learn" mode tomaximize sensitivity / minimize false rejects with your specific product.
  
  
• Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product effect at a sensitivity of 2.5mm ferrous, 2.9mm non ferrous, and 3.2mm stainless steel at 300 kHz.
  
  
• Quick teach feature learns new products in 4 to 7 passes.
  
  
• The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.
  
  
• Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.
  
  
• 304 stainless steel search head and conveyor construction.
  
  
• 110 volt single phase (standard household current) electrical input.
  
  
• NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.
  
  

This make / model conveyorized METAL DETECTOR configuration is generally in stock NEW at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection equipment needs.

Alard item refrence #: Y5097