Alard peeler-feed conveyor Y4685
with Alard pickle washer brush washer Y4727

VIDEO WALKAROUND
Alard peeler-feed conveyor Y4685
with Alard pickle washer brush washer Y4727
from Alard Equipment Corporation.

Our Alard elevating peeler-feeder belt with the Alard four-roll stainless steel brush-washer, pickle washing machine, new in stock at Alard Equipment Corp 315-589-4511.

CONSISTING OF:

• ALARD ELEVATING BELT CONVEYOR / ELEVATING FEED CONVEYOR with HOPPER, 12 inch wide cleated belt, food grade, stainless steel...
  
  
  • The Alard cleated belt PEELER-FEED CONVEYOR, was designed to consistently even feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables into an Alard peeling machine, or other downstream food processing or packaging equipment. This incline feed conveyor with tapered in-feed hopper is configured at an optimal discharge height for feeding an ALARD 4-roll pickle washer, scrubber, abrasive peeler / brush washer (not included)...
    
    
  • FEATURES:
    • 32 inch wide by 16 inch long tapered stainless steel feed hopper.
    • 12 inch wide by 8.5 foot long cleated incline belt.
    • Cleated belt with 2 inch high cleats on 6 inch centers.
    • The belt runs between 7.5 inch high sides flared to 17 inches wide at the tops.
    • 33 inch infeed height, 53 inch high discharge with discharge chute.
    • All food grade sanitary stainless steel construction.
    • Top mounted 1 HP drive motor.
    • 208 / 230 / 460 volt 3 phase electrical input. Variable speed controller available at extra charge (Call 315-589-4511 to discuss your food process feed conveyor requirements).
    • ALARD item reference #: Y4685
      
      
      
• FOUR ROLL BRUSH WASHER / PICKLE-WASHER / SCRUBBER for pickles, cucumbers, and other fruits and vegetables, stainless steel, in-stock NEW...
  
  
  • A versatile washer for fresh pack pickles, brine stock, beets, potatoes, carrots, and other similar vegetables. Shown here with brushes as a continuous four roll brush-washing scrubbing and/or pickle washing machine. It can also be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler, scrubber, or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and other raw fresh produce items.
    
    
  • OPERATION:
    
    
    • Raw product is continuously fed to the brush-washing / peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine. The water spray, rotating brushes and friction of the products rubbing against each other tumble and turn the product so that it is thoroughly scrubbed from every conceivable angle.
      
      
  • FEATURES:
    • 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.
    • Currently configured with four (4) hex-pex black poly brush rolls for removing pickle nodes, pickle thorns or pickle hair removal, as well as other washing, scrubbing, and finishing applications. Can be set up with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeling, scrubbing, action. Call 315-589-4511 to discuss your particular scrubber, washer, peeler application.
    • Each spinning roll is 6 inches in diameter by 6 foot long.
    • Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
    • Peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.
    • Water, dirt, stems, leaves, peels, and other debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet. We recommend an Alardsieve water filter to remove debris so your washwater can be reused. Call 315-589-4511 to discuss your water reclaim screen requirements.
    • Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing) and the degree of finish desired.
    • The abrasive brush rolls are mounted parallel (in-line) with product flow.
    • Complete with central lubrication cluster for ease of maintenance.
    • Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
    • We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box. Call 315-589-4511 for pricing.
    • ALARD item reference #: Y4727

As of this writing, ALARD EQUIPMENT has BOTH of thesse machines NEW in stock and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fruit and / or vegetable peeling and washing equipment need.