DEWATERING BELT CONVEYOR 11x2,
food grade, stainless steel...

A food grade stainless steel conveyor with perforated belt and water catch pan, for liquid-solids separation, in the context of washing or rinsing whole or pre-cut vegetable and fruit products for industiral food processing and packaging. The fresh, cooked, whole, diced, sliced or shredded product stays on the belt while water runs through the belt and is directed to waste, or recirulated as wash water.

FEATURES:

• 22 inch wide by 24 inch long stainless steel infeed chute tapers to 16 inches wide where it feeds onto the belt, with crank-adjustable gate for setting the depth of the product on the belt.
  
  
• 11 foot 4 inch long by 23.75 inches wide, but is configured for a 22 inch USABLE width, with 5/8 inch high by 2 inch wide UHMW plastic strips extending out over the edges of the belt.
  
  
  • The interlocking plastic chain type belt has 7/16 inch long by 1/16 inch wide oval slots to allow water to drain through the belt.
    
    
  • The belt runs in horizontal for 6 feet, and then begins a gentle incline for 64 inches of belt length.
    
    
  • The elevating discharge section has 2 inch high stainless steel rails over the UHMW strips, and drops through a 7 inch long discharge chute tapering to 12.5 inches wide.
    
    

• Mounted immediately above the discharge end of the belt is a powerful rare-earth ferrous metal trapping magnet shrouded in stainless steel.
  
  
• There is a 4 foot long stainless steel water catch pan beneath the horizontal section of the belt, starting one foot from the infeed end of the belt (which is where the infeed chute drops product onto the belt).
  
  
  • The dewatering pan slopes toward the infeed end, to a center back-side outlet with a 2 inch threaded pipe connector, which now has a right angle / elbow pipe to the right side of the conveyor, tapered to a 1.5 inch Tri-clamp connection.
    
    
    
• Beneath the conveyor and directed to the return section of the belt are two cleaning / lubricating spray headers with a stainless steel catch pan beneath.
  
  
• 54 inch infeed height to infeed chute, 45 inch working height at belt, 53 inch high discharge height from belt, 38 inch discharge height from the discharge chute, on tubular stainless steel frame with threaded rod adjustable feet.
  
  
• Overall dimensions are approximately 13 foot long by 39 inches wide by 80 inches high.
  
  
• All sanitary food grade stainless steel construction.
  
  
• Complete with a mechanical variable speed 3 phase drive (Call 315-589-4511 to discuss your voltage requirements).

As of this writing, this food process dewatering belt is in stock at Alard, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process liquid-solids separation needs.

Alard item reference #:Y2245