Z4387 Packrite BAND SEALER
Y0500 Alard single-station BAG PACKING TABLE
VIDEO DEMO

Z4387 Packrite 6000 BAG SEALER, Y0500 Alard single-station BAG FILLER
from Alard Equipment Corporation.

SINGLE-STATION NETWEIGH BAG FILLING TABLE, with wash-down scale, and adjustable height pneumatic bag-holder, all food grade stainless steel...

A food grade sanitary stainless steel BAG PACKING TABLE / hand-pack bag filler for fresh-cut / pre-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder.

OPERATION:

• The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.
  
• The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product easily be remove if needed to "make weight".
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place, and the process is repeated.
  
  

FEATURES:

• The stainless steel bag-filler / pack table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
  
• 30 pound capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are/is available to customer specification; CALL 315-589-4511 to confirm availability to discuss your particular fruit and/or vegetable netweigh bag filler specifications.
  
• 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size bags).
  
• Stainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.
  
• Beneath the bag holder is a 10inch square stainless steel weigh cell platform which is adjustable to accommodate different bag heights.
  
• 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads. NOTE: Pictures show optional casters, available at extra-cost; --call 315-589-4511 to discuss your specific pack table specifications.
  
• All food grade sanitary stainless steel construction.
  
• 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.
  
• NEW!

While we occasionally sell out of on-hand machnines, we maintain this by-hand bag-filler in stock as continuously as possible; --NEW, fully assembled, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

SEE more details at https://www.alard-equipment.com/a-f/y0500sne.htm

Alard item reference #:Y0500

NEW PACKRITE / BANDRITE / FRESHRITE Model 6000 CONTINUOUS BAND SEALER...

The Packrite 6000 BAG SEALER is manufacturer recommended for industrial food process and USDA food packaging applications, as well as medical, military, agricultural, and many other flexible bag and pouch sealing applications. It seals most types of barrier materials in addition to straight polyethylene up to 12 mil single thickness or 6 mil single thickness on bags with gussets (24 mil total). Change over from one material to another is done with very little or no adjustment required...

FEATURING:

• Manufacturer rated for up to 550 inches per minute on up to 10 mil thicknesses.
• Digital temperature control.
• Variable speed drive.
• Flat seal -- specify 3/8 inch or 3/4 inch.
• Specify feed direction (left to right or right to left).
• Standard adjustable height stand is mild steel with USDA approved paint.
• Stainless steel top and side shrouding.
• Maintenance on this machine is designed to be user friendly.
  • Sealing band change can be made in minutes without tools due to tilt-away drive system (no tools required band change a standard feature).
  • If required, replacement of the temperature controller is snap-in, snap-out with no disconnecting or reconnecting of wiring necessary.
  • 110 volt single phase electrical input.

OPTIONAL FEATURES:

• Stainless steel adjustable height stand (shown in video).
• Corrosion resistant stainless steel bottom plates (machine in video has).
  
• Casters for portability (shown in video).
• Swivel mount.
• Bag trimmer (with or without vacuum).
• Coder options available, ink or embossing.
• Bag perforator.
• 220 volt single phase electrical input option available.
• Crimper seal to make a checkered seal impression which adds a nice cosmetic appearance on clear polypropylene materials.
• Bag-holding conveyor option available, with or without slave speed synchronization, for sealing heavier bags.
  
  

As of this writing, this NEW Packrite 6000 continuous-flow bag-sealing machine is USUALLY in stock at ALARD and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging needs.

SEE more details at https://www.alard-equipment.com/a-f/z4387sne.htm

ALARD item reference #: Z4387