 RECENT ACQUISITIONS, ALARD EQUIPMENT CORP. |
|
A list of some recently acquired items of equipment - items purchased, received into stock, and/or listed as available for sale nationally. CALL us for details!
ALARD EQUIPMENT CORP
Contact us!
Archives |
Wednesday, April 30, 2008
RECENTLY TAKEN INTO STOCK... DONALDSON TORIT "Unimaster 150" DUST COLLECTION SYSTEM, Model UMA152K3AD; manufacturer rated for intermittent use with 150 square feet of cloth area and a throughput of 450 to 1000 cubic feet (of air) per minute. 8" side air intake to filtration chamber where heavy product drops to a bottom hopper/collection can while light particulate is drawn upward into the filter bags. 2HP 3450 RPM fan. Power bag shaker for filter cloth bag cleaning/clearing. NON-explosion-proof configuration originally specified and used for dust collection in combination with a bag dump station, powder conveyor and mixer (not included) in a milk-powder blending facility. In stock in good condition and available for timely service and shipment. (Z9334) URSCHEL Model G DICER with stainless steel slice shell with 7" slice shell opening. Presently set / last used for 3/4" x 1/2" x 1/2" dices, but other cutting setups are available; --tell us your cutting specification! All stainles steel product contacts, shrouding, frame, knives and guards. Epoxy painted main spindle support castings. 2HP 230/460 volt 3 phase drive with factory stainless steel operator control panel. In stock available for timely service and shipment. (Z9352) URSCHEL Model G DICER, all stainless steel, with 10" slice shell opening. Late model machine with Urschel safety interlock system, presently set/previously used for julienne cuts of 1/8" x 1/8" x 1/2", but other cutting setups are available ; --please tell us your cut specification. All stainless steel product contacts, shrouding, frame, knives, guards, and plated main castings. 2HP 230/460 volt 3 phase drive with factory stainless steel operator control panel. In stock in good condition available for timely service and shipment. (Z9377) URSCHEL MODEL G DICER, with Urschalloy (bronze magnesium alloy) slice shell with 7" slice shell opening. Cutting parts available for a range of dice sizes; --tell us your cutting specification! All stainless steel infeed hopper, safety guards and shrouding, and tubular stainless steel support frame. Epoxy painted main castings. 2HP 208/230/460 volt motor. In stock available for timely service and shipment. (Z9353) URSCHEL MODEL G-A DICER with stainless steel slice shell with 10" slice shell opening. Late model machine with Urschel safety interlock system, presently set / previously used for 1/4" dices, but parts are available for other sizes per customer requirment (ask your Alard Sales Rep). USDA listed model with all stainless steel slice shell, impeller, and knives. Complete with all stainless steel guards, shrouds, infeed hopper, discharge chute and stainless steel tubular frame. Stainless steel factorycontrol box with operator on/off controling the 2HP 230/460 volt 3 phase electrical input drive. In stock in very good condition and available for timely shipment. (Z9641) Friday, April 25, 2008
RECENTLY ARRIVED AT ALARD!!! CREPACO 200 gallon LIQUIFIER, 30HP, cone bottom, galaxy impeller, all sanitary stainless steel construction, with 3" front bottom discharge with sanitary threaded connector. In stock in EXCELLENT condition available for timely shipment! (Z9677) URSCHEL BROCCOLI / CAULIFLOWER / FLORETTE CUTTERSs! Urschel Labs Model H dicer set up with Urschel 2-blade broccoli impeller with 14" slice shell opening. Crosscut and circular knife cutting spindles configured for 3/4" dice size; --other cutting setups are available; --please tell us your cutting specification! Available with or without safety interlock system and control panel. All stainless steel product contacts, stainless steel hopper, guards, discharge chute and tubular stainless steel frame. Complete with 2HP 208/230v 3ph motor. In stock available for timely shipment! Qty (2) available. (Z9426, Z9429) LYCO INTERMEDIATE BEAN SNIPPER. All stainless steel construction including tubul ar support frame, infeed hopper, discharge chute, cutting knives and hinged side panels. 32" diameter x 78" long drum. Plastic, straight slotted pockets. 72" in feed height, 47" discharge height. 3 HP 3 Phase constant speed Eurodrive gearmotor. (Z9648) LYCO "MINISNIPPER" STAINLESS STEEL BEAN SNIPPER. 22" diameter by 4' long drum with plastic pockets and (7) V-knives. The frame, guards and chutes are stainless steel. There is a 12" wide by 17" long infeed chute at a 52" infeed height and an 18" diameter discharge chute at a 41" discharge height. The drum is driven by a 1/2hp 208/230v 3ph belt drive. In stock in very good condition available for timely shipment. (Z9643) Thursday, April 24, 2008
COMING IN SHORTLY... URSCHEL Model H-A DICER, "A" model for USDA sanitary inspection compliance, late model, with safety interlock system and SS factory control panel. (Z9714) URSCHEL CC SLICER, with Urschalloy impeller, late model with safety interlock system and SS factory control panel. Very good operational condition (Z9710) URSCHEL OV SLICER, with standard infeed hopper and floppy hold-down belt; 2HP motor. Very good operational condition (Z9712) URSCHEL Model G-K DICER, does all the same cuts as a G (or G-A) plus crinkle cut (the "K" stands for "Krinkle"). Urschalloy slice shell. 2HP, good operational condition. (Z9712) URSCHEL Model G-KA DICER, "A" model for USDA sanitary inspection compliance. Does all the same cuts as a G (or G-A) plus crinkle cut (the "K" stands for "Krinkle cut"). Stainless steel slice shell, plated castings. 2HP. (Z9696) URSCHEL COMITROL Model 1700, 30HP, with Microcut head, cone hopper infeed. (Z9716) URSCHEL Model J-A DICERs, "A" model for USDA sanitary inspection compliance, qty (2) coming in. (Z9721, Z9720) STAINLESS STEEL WASH TANK / RINSE TANK / DIP TANK, with cleated woven stainless steel elevating discharge conveyor, approximately 20" wide by 6' long tank, with discharge to approximately 6' infeed height (all dimensions subject to confirmation on arrival). In very good condition complete with conveyor drive. (Z9719) VANMARK Model 30, (6) ROLL PEELER. stainless steel, with brush and abrasive. (z9722) BOCK MODEL FP-90 SPINNERs, each complete with basket, stainless base and feet, controls and timer, air brake. (Z9717, Z9718) JUST LISTED as available for sale... 10" CORNELL FOOD PUMP, Model 10NHPP expanded volute hydro-food pump with 15 HP 3 phase drive mounted together on common tubular stainless steel frame. (Z9725) Available with or without stainless steel VORTEX INFEED TANK (Z7934); --a 7' long by 4' wide by 4' deep with tapered bottom and flanged outlets built/designed specifically for the Cornell 10NHPP food pump. BACKUS Model KP50 KNIFE PEELER / DRY PEELER for oblong vegetables. Stainless steel construction. Manufacturer rated for 40-50 pieces/min. Last used on carrots. (Z9708) POLYPACK Model CFH 16-40 STAINLESS STEEL TRAY WRAPPER with HEAT SHRINK TUNNEL, all stainless steel construction with plexiglass safety enclosures. manufacturer rated for up to 70 cycles per minute. In very good condition. (Z9707) Cherry Burrell Model HCIF, High Capacity INGREDIENT FEEDER / TOPPINGS FEEDER / FRUIT FEEDER , all stainless steel construction, complete with integral mixer, metering auger and onboard piston feed / enrobing pump with variable speed drives. Similar to Crepaco Model S410, 420 and/or 430. Last used for sprinkling nuts and other toppings on ice cream. (Z9702) 12 valve PACIFIC ROTARY PRESSURE FILLER, set / last used for jars. Worm/star infeed/discharge. Very good condition. (Z9704) PNEUMATIC SCALE PNEUMACAPPER, 12 head rotary capping machine set for 48mm breakaway plastic caps, with undercover nitrogen injection. With change parts included for 70mm, 83mm, 89mm caps. (Z9705) FINIS ONION WASH TANK / DIP TANK, top and bottom belts for positive immersion, all stainless steel construction, with elevating discharge conveyor. Last used to rinse/apply disinfectant solution to 5 & 20 lb mesh bags of whole onions. (Z9688) URSCHEL OC SLICER, 30 degree head angle, 16 blade cutting disk (we may have other cutting setups available; --please tell us your cutting spec!). Very good operational condition per owner. (Z9679) Wednesday, April 23, 2008
JUST LISTED AS AVAILABLE... Krones SOLOMATIC 30 station rotary FRONT AND BACK LABELER, cold glue, running condition, qty (3) available: (Z9692,Z9694, Z9695) Krones RONDELLA 88 inline wrap-on LABELER, hot glue, with thru-conveyor, L to R container flow, running condition, qty (2) available: (Z7937, Z9706) Krones CANMATIC, 18 station rotary wrap-on LABELER, hot glue, running condition, qty (2) available: (Z9690, Z9691). Krones AUTOCOL 30 station rotary LABELER for pressure sensitive labels. (Z9683) |
