 RECENT ACQUISITIONS, ALARD EQUIPMENT CORP. |
|
A list of some recently acquired items of equipment - items purchased, received into stock, and/or listed as available for sale nationally. CALL us for details!
ALARD EQUIPMENT CORP
Contact us!
Archives |
Tuesday, October 24, 2006
JUST IN AT ALARD! Qty (2) 200 CUBIC FOOT STAINLESS STEEL DOUBLE RIBBON BLENDERs. Each 120" long by 60" wide by 65" deep vesel with 16" square center bottom outlet with pneumatic slide gate. Double helix ribbon diameter 60", with 6" wide by /75" thick ribbons. 5.5" diameter center shaft at exterior bearing, with pneumatic shaft seals. Stainless steel cover. Ortex pnuematic slide gate. 50 HP 230/460 volt 3 phase constant speed drive motor coupled to a Falk gear reducer geared for 41 RPM at the ribbons. In stock in good condition and available for timely shipment. (Z8931, Z8932) GORING KERR MODEL DSP-2 DIGITAL ALL STAINLESS STEEL METAL DETECTOR WITH THRU-CONVEYOR. Presently set for a 10" high x 14" wide usable aperture opening but wrench-adjustable for up to 13" usable aperture height. Digital sensor head in stainless steel detection head enclosure with washdown-sealed epoxy chute. Mounted on an all stainless steel washdown conveyor with a 12" wide by 70" long Intralox type belt over a UHMW bed surface, set for a 33" working height (while mounted on 7.5" high casters). The tubular stainless steel frame conveyor has a vertical warning light pedestal, and gasketed electrical control boxes integrated with the detection head for conveyor-stop / alarm light reject. This metal checker is in stock in EXCELLENT condition and available for immediate shipment. (Z8952) GORING KERR TEK 2 METAL DETECTOR with NEW BELT CONVEYOR. 6" high by 13.5" wide aperture detection head with washdown gasketed epoxy-painted aluminum enclosure. Detection head mounted on a NEW 12" wide by 5' long all stainless steel through-conveyor with NEW Intralox type belt, with NEW washdown motor and NEW PVC control box with horn and belt-stop reject setup. Tubular stainless steel conveyor support framing. Detector head has a 7" overall aperture height, and the UHMW conveyor bed and belt passing through it (with some clearance) leave a 6" usable aperture height on the conveyor. The detector has been refurbished by a factory trained Technician, the conveyor is all NEW, and this combined washdown-configured unit is in stock in EXCELLENT condition and available for immediate shipment! (Z8953) GORING KERR DSP DIGITAL METAL DETECTOR with NEW BELT CONVEYOR. 4" high x 13.5" wide usable aperture opening in epoxy painted aluminum washdown-sealed search head. The detection head has integral digital controls, and comes mounted on a NEW all stainless steel washdown through-conveyor with NEW 12" wide by 60" long interlocking plastic chain type belt running over a UHMW plastic bed. The tubular stainless steel frame belt conveyor is complete with a new washdown gasketed PVC control box with a new 110 volt single phase washdown motor, all integrated with the the search head to provide for a horn/stop reject setup. 8" overall search head aperture height (conveyor belt and bed take up 1 1/8"). The conveyor is NEW. The used metal detector has been refurbished by a factory trained Technician , and is in EXCELLENT mechanical, cosmetic, and electronic condition. The combined metal detection system is in stock and available for immediate shipment. (Z8954) NEWLY LISTED Qty (2) matching 180 CUBIC FOOT DOUBLE RIBBON BLENDERs. Each 144" long by 45" wide by 48" deep vessel with 13" square center bottom outlet with pneumatic slide gate. 30HP 3 phase drive. All heavy steel construction, painted exterior. Previously used for mixing powdered and liquid bakery mixes. Drives removed for shipment, otherwise In good condition. (Z8971, Z8972) |
