RECENTLY ACQUIRED at Alard Equipment Corp

Y1193

2012-05-16T17:22:24Z

JUST REFURBISHED, and
READY FOR IMMEDIATE SHIPMENT!

GROEN Model AE1-40 SELF-CONTAINED ELECTRIC-FIRED STAINLESS STEEL 40 GALLON KETTLE. 26" inside diameter x 22" deep hemispherical bottom vessel with hinged top cover, and 1.25" front bottom outlet with valve. 36 inch infeed height, 11.5 inch discharge height from valve. Manufacturer stamped, National Board coded, U-stamped and NSF tagged; 30 psi @ 300 degrees Fahrenheit.

Thermostatically controlled electric heat; 208/230 volt 3 phase electrical input.

In stock in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

You may view a picture of this machine at
http://www.alard-equipment.com/g-o/y1193.htm
OR find it on our general listings page under "K" for KETTLE.

Alard item reference #:Y1193

y0863

2012-05-16T17:12:54Z

JUST REFURBISHED, and
READY FOR IMMEDIATE SHIPMENT!

CINTEX SENTRY STAINLESS STEEL DIGITAL METAL DETECTOR w/ THROUGH CONVEYOR.

3.25" high by 8.5" wide usable aperture dimension in an all stainless steel search head enclosure with digital touch screen operator controls. The search head is mounted on and integrated with a 8" wide by 52" long stainless steel thru-conveyor, with a food grade rubber belt running in a left to right product flow (from the perspective of the control position), at a 38" working height on height-adjustable legs.

Complete with BELT-STOP-ALARM REJECT system. 110 volt single phase (standard household current) electrcial input for both the search head and conveyor drive.

In stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

You can SEE MORE PICTURES of this machine at
http://www.alard-equipment.com/a-f/y0863.htm
OR find it on our general listings page under "D" for DETECTOR, metal.

Alard item reference #:Y0863

y1272

2012-05-15T18:58:50Z

ASEECO Model ALS-0-15CP Z-shaped BUCKET ELEVATOR CONVEYOR, with 7 foot long horizontal infeed section at a 21" infeed height, a 9.5 foot vertical rise, and a 5 foot horizontal (top) discharge section at a 10 foot 4 inch discharge height.

White plastic buckets 4.5 inches long (front to back) by 15 inches wide by 2.5 inches deep.

Painted steel frame, previously used in a dry bakery application. Currently fitted with a 575 volt 3 phase drive (motor could be rewound to US voltage or run via a transformer), otherwise this elevating bucket / feed conveyor is IN stock in EXCELLENT operational, mechanical, and cosmetic
condition, ready to go and available for immediate shipment.
Alard item reference #:Y1272

y1307

2012-05-15T15:55:00Z

WATSON MARLOW MASOSINE Model SPS025-NNTC STAINLESS STEEL POSITIVE DISPLACEMENT SINE PUMP with 1HP drive. 2.5 inch inlet / outlet ports with Tri-clamp connections. This food grade sanitary stainless steel Sine pump is mounted on a stainless steel based coupled to a 1 HP 110/220 volt single phase mechanical VARIABLE SPEED DRIVE geared for and adjustable for 40 to 275 RPM.

Manufacturer rates this model pump for USDA sanitary food grade applications, up to 15 gallons per minute at 275 RPM, up to 150 psi pressure, temperature up to 250 degrees Fahrenheit, and as able to pass particulate sizes up to .87 inch.

In stock complete and in EXCELLENT operational, mechanical, electrical and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #:Y1307

y1340

2012-05-15T14:32:28Z

KEY ISO-FLO stainless steel VIBRATING CONVEYOR / VIBRATORY FEEDER, 12 inches wide by 14 feet long with a solid flat bottom pan with 5 inch high sides; with
hinged Lexan top covers with hold-down clamps.

The all stainless steel vibratory conveyor sits on a stainless steel base with isolation spring mounts (can be set on legs or suspended from a ceiling), complete with 1HP 208/230/460 volt 3 phase vibrator drive. All food grade stainless steel construction. Key Iso-Flo model 4305501.

IN stock in VERY good condition, available for timely shipment.
Alard item reference #:Y1340

y1327

2012-05-15T13:47:48Z

OLNEY STAINLESS STEEL VIBRATING DEWATERING SHAKER / VIBRATORY GRADER.

26.5 inches wide by 87.5 inches long, consisting of an 18 inch long solid infeed section leading to a to 65.5 inch long screen section with side walls over the screen edges narrowing the usable screen width to 24 inches. Straight-through discharge section tapered in 5 inches on either side for an 18 inch discharge width, with a 4 inch long bottom chute declining 3 inches.

36 inch infeed height, 28 inch discharge height, with 3.5 inch high stainless steel sides around the screen bed, with quick-release screen clamps for fast screen changeover. Beneath the shaker bed is a tapered underside stainless steel dewatering/ fines collection pan with a 6 inch center bottom outlet tapered down to 4".

All food grade stainless steel construction including 2"x 4" tubular support frame. 1 HP 230/460 volt 3 phase belt drive with Ajax eccentric.

In stock in good solid condition, available for timely shipment.
Alard item reference #:Y1327

y1330

2012-05-08T16:26:04Z

GORING KERR MODEL TEK-21 METAL DETECTOR with STAINLESS STEEL BELT-CONVEYOR, 4.25" high by 20" wide usable aperture opening in the epoxy painted aluminum search head enclosure.

The metal detection head is mounted on a Schneider stainless steel CONVEYOR with a 7.75" wide by 48" long conveyor belt, running at a 55" working height on adjustable feet. Right to left product flow. Currently configured for a compressed-air blow-off reject with compressed air tank, but can be easily converted to a belt-stop-alarm or push-off reject. Conveyor geared for approximately 210 fpm belt speed.

110 volt single phase (standard household current) electrical inputs for both the head and conveyor drive.

In stock in good operational condition and available for timely shipment.
Alard item reference Y1330

y1024

2012-05-03T20:08:52Z

Lomax Model SBA300, 300 GALLON STAINLESS STEEL VERTICAL TANK, 44 inch diameter by 46 inch deep straight sided dish bottom single wall vessel with 2.25" center bottom outlet with Triclamp discharge fitting. 2.75 inch side (near top) stainless steel overflow pipe with Tri-clamp fitting. Two-piece stainless steel removable hinged cover. Food grade stainless steel construction, including stainless steel legs set for 70 inch infeed (top lip) height, 14 inch discharge height.

In stock in good condition, available for immediate shipment.
Alard item reference #:Y1024

y1336

2012-05-03T19:40:28Z

STAINLESS STEEL TABLETOP CHAIN CONVEYOR 90 DEGREE CONVEYOR CURVE, LEFT-HAND with 10 inch wide Delrin chain. 24 inch long straight infeed section to left-angle curve, then after the bend, a 30 inch long discharge section. UHMW plastic outside rail only, 3 inches high. With stainless steel legs currently set for a 52" working height.

3/4 HP 208/230/460 volt 3 phase washdown motor with gear drive for 380 feet per minute belt speed. 5 foot long by 4 1/2 feet wide by 55 inches overall height as configured.

In stock in good operable condition, available for immediate shipment.
Alard item reference #:Y1336

y1334

2012-05-03T18:43:01Z

y0955

2012-05-03T17:33:25Z

250 GALLON SINGLE WALL HEMISPHERICAL BOTTOM STAINLESS STEEL TANK, 52 inch diameter by 42 inch deep round-bottomed vessel with 2-inch center bottom outlet with threaded discharge fitting. ON a stanless steel support frame providing for a 5 inch discharge height.

In stock in good condition available for immediate shipment.
Alard item reference #:Y0955

y1342

2012-04-26T19:24:18Z

STAINLESS STEEL DIGITAL METAL DETECTOR with STAINLESS STEEL BELT CONVEYOR with PULLBACK REJECT.

Goring Kerr model DSP metal detector with 3 inch high by 23 inch wide usable aperture opening in the stainless steel search head enclosure.

The detection head is mounted on a stainless steel thru-conveyor with a 23.75 inch wide by 74 inch long plastic interlocking chain type belt with 1.25 inch high UHMW rails mounted over the belt edges (which is why the usable aperture is narrower than the belt).

The through-conveyor is complete with a pneumatic PULLBACK REJECT SYSTEM with a 7 inch "throw" (the distance the belt pulls back). The conveyor belt runs in a left to right product flow direction (from the perspective of the control panel) at a 35 inch working height, on threaded-rod adjustable feet.

This metal detection system has digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. 110 volt (standard household current) single phase electrical input for both the detection head and conveyor drive.

In stock in good operable condition, available for timely shipment.

Alard item reference #:1342

y1268

2012-04-25T18:49:31Z

HI-SPEED Micromate Model MM Stainless Steel BELT TRANSFER CHECKWEIGHER, consisting of a 16" wide by 40" long infeed conveyor, leading to the belt transfer weighcell with dual 7.5" wide by 13" long food grade rubberized belts, which feed to a 16" long by 20" wide interlocking plastic chain type discharge / takeaway belt conveyor running in a left to right product flow direction, with air blast / blow-off reject pushing off to the right. This weight checker is complete with touchpad operator controls on a nice stainless steel standalone pedestal, with notification lights on top. The conveyor is presently set to run at a 34" working height on threaded rod adjustable feet. Stainless steel construction, with plastic shrouds.

This HiSpeed check-weigher is in stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1268

y1332

2012-04-25T18:33:13Z

DIGITAL METAL DETECTOR with STAINLESS STEEL THRU-CONVEYOR, Goring Kerr Model DSP2. 4 3/8 inch high by 14 inch wide usable aperture opening in an epoxy painted aluminum search head enclosure, with digital controls. The detection head is mounted on a 9.75 inch wide by 5 foot long stainless steel conveyor, with plastic interlocking chain typebelt; running in a left to right product flow direction (from the perspective of the control panel position) at a 47 inch working height. This integrated metal detection system features a pneumatic (compressed air) blow-off reject system with an air tank; --with the reject push-off direction to the right. Digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. Single phase electrical input for both the detection head and conveyor belt drive.
In stock in good / operable condition, available for timely shipment.
Alard item reference: Y1332

y1335

2012-04-25T18:11:05Z

DIGITAL METAL DETECTOR with STAINLESS STEEL THRU-CONVEYOR, Goring Kerr Model DSP2. 4 7/8 inch high by 14 inch wide usable aperture opening in an aluminum search head enclosure, with digital controls. The detection head is mounted on a 9.75 inch wide by 56 inch long belt conveyor running in a left to right product flow direction (from the perspective of the control panel), with plastic interlocking chain type belt; running at a 54 inch working height.

This integrated metal detection system features a pneumatic (compressed air) blow-off reject system with an air tank; --with the reject push-off direction to the right. Digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. 110 / 220 volt (standard household current) single phase electrical input for both the detection head and conveyor drive.

In stock in good /operable condition, available for timely shipment.
Alard item reference: Y1335